XR-Underground » Performance & Mechanical » Chassis » Suspension » One last quick question...

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-15-2012, 07:50 PM
Xrunnerbjt's Avatar
Xrunnerbjt Offline
5th Gear Member
 
Location: West Virginia
Posts: 596
iTrader Rating: 0
2007 Black Sand Pearl
Mods: URD MK3 , JBA Long tube headers, XII drop 1.75 front 2in rear,QA1's URD S/S ,Aero Turbine 2525, 20'' Boss 335, TRD Shift Knob, TRD Seat Covers, ScanGaugeII, ProSport Boost and innovate wideband, BHLM,FLM, T-Rex Eyelids,Tinted Tails, 15% front windows, 5% back, Blacked out Emblem, 5900k Heads and Fogs, Vent Visors, Tacoma Floor Mats, Dual 7'' touch screen
One last quick question...

im getting ready to order my lowering kit from 12 performance, and im getting the 2 inch blocks and was wondering if it would ride any worse than with the 1 inch blocks that i already have? or would the ride be about the same?
__________________

Reply With Quote
  #2  
Old 04-15-2012, 07:57 PM
hottacoX's Avatar
hottacoX Offline

XRU Overdosed
 
Location: Georgetown, Ontario
Posts: 4,739
iTrader Rating: 3
2006, Rarely Red
Mods: TRD CAI w/Coupe cover | NST CR/WP/ALT | NST Manifold spacer | Street Star Rad hoses | URD SS w/Coupe 8.5" shifter | XII Performance Drop | QA1 | XII performance sways | URD trac bar | Gen2 DTLT | URD MAF Cal w/PNP harness | Redline Elite | BHLM | Cravenspeed Stubby | 6000k HID | Pioneer AVHP4200| 2 JBL 10's | Custom fiberglass box | Speedsturr Tonneau | VIS Carbon fiber hood | HVM CF rad/fuse box cover | HVM CF XR emblem|Weathertech Digifit | Tint 5%+20%| TXS Knocklite | Prosport EVO oil pressure| Innovate Wideband | Scangauge2 | TRD Oil+ Rad Cap(+10 HP)
1 inch higher = 1 inch closer to frame.... Therefore it will be 'worse' than what you have now.

Want better? Save your pennies for the qa1's
__________________
Reply With Quote
  #3  
Old 04-15-2012, 08:02 PM
Xrunnerbjt's Avatar
Xrunnerbjt Offline
5th Gear Member
 
Location: West Virginia
Posts: 596
iTrader Rating: 0
2007 Black Sand Pearl
Mods: URD MK3 , JBA Long tube headers, XII drop 1.75 front 2in rear,QA1's URD S/S ,Aero Turbine 2525, 20'' Boss 335, TRD Shift Knob, TRD Seat Covers, ScanGaugeII, ProSport Boost and innovate wideband, BHLM,FLM, T-Rex Eyelids,Tinted Tails, 15% front windows, 5% back, Blacked out Emblem, 5900k Heads and Fogs, Vent Visors, Tacoma Floor Mats, Dual 7'' touch screen
thanks bro.
__________________

Reply With Quote
  #4  
Old 04-15-2012, 09:21 PM
CBRBob's Avatar
CBRBob Offline
XRU Junkie
 
Location: Central NJ
Posts: 1,717
iTrader Rating: 0
06 BSP
Only if it hits lol
__________________
CBR Bob
TPM Official Coach#29 Team Pro-Motion
Rider Ed. of N.J. Inc. Senior RiderCoach RiderEd of NJ Inc.
Reply With Quote
  #5  
Old 04-15-2012, 09:27 PM
Xrunnerbjt's Avatar
Xrunnerbjt Offline
5th Gear Member
 
Location: West Virginia
Posts: 596
iTrader Rating: 0
2007 Black Sand Pearl
Mods: URD MK3 , JBA Long tube headers, XII drop 1.75 front 2in rear,QA1's URD S/S ,Aero Turbine 2525, 20'' Boss 335, TRD Shift Knob, TRD Seat Covers, ScanGaugeII, ProSport Boost and innovate wideband, BHLM,FLM, T-Rex Eyelids,Tinted Tails, 15% front windows, 5% back, Blacked out Emblem, 5900k Heads and Fogs, Vent Visors, Tacoma Floor Mats, Dual 7'' touch screen
my one inch block never hits at all hardly, thats why i asked about the 2 inch.
__________________

Reply With Quote
  #6  
Old 04-15-2012, 09:41 PM
adamewwy's Avatar
adamewwy Offline
4th Gear Member
 
Location: Columbia,Kentucky Adair Co.
Posts: 448
iTrader Rating: 0
2006,Black Sand Pearl
Mods: SS street drop w/ composite monoleafs| APR X-1 | URD SS | 20" Black Boss 335's | 5% tint | Custom Tinted Tails | c2c Eyelids painted BSP | BHLM | FLM | CAI | Pioneer AVHP-3200 double din touch screen | 15" Kicker Solobaric L5 in ported box | 1200 Watts Hifonics Amp | Entire interior lined w/ Dynamat | HID Headlights 6K | Hyper white LED turn/parking bulbs| Debadged truck | OBX pedals | TRD seatcovers | tailgate spoiler | Blue LED Gauge Cluster Swap| CravenSpeed Stubby | Redline Hood Struts | LFM | Dual Gauge Pod w/ GlowShift Gauges |
when you install the 2" blocks just go ahead and cut out your bump stop brackets and all that garbage and install a set of the low profile bump stops from XII Performance and you will be good. I bottomed out all the time with the stock stops. I still have my brackets on my frame also but never bottom out now with the low pro stops from XII. Mos def worth it.

BTW I'm running a monoleaf setup on my rear just fyi.
Reply With Quote
  #7  
Old 04-15-2012, 09:48 PM
Xrunnerbjt's Avatar
Xrunnerbjt Offline
5th Gear Member
 
Location: West Virginia
Posts: 596
iTrader Rating: 0
2007 Black Sand Pearl
Mods: URD MK3 , JBA Long tube headers, XII drop 1.75 front 2in rear,QA1's URD S/S ,Aero Turbine 2525, 20'' Boss 335, TRD Shift Knob, TRD Seat Covers, ScanGaugeII, ProSport Boost and innovate wideband, BHLM,FLM, T-Rex Eyelids,Tinted Tails, 15% front windows, 5% back, Blacked out Emblem, 5900k Heads and Fogs, Vent Visors, Tacoma Floor Mats, Dual 7'' touch screen
yeah , im definately getting the low pros, that was already in the bag, i dont really wanna do any cutting , i assume they just unbolt out and the low pros go in its place? all im worried about it bottoming out every 5 seconds on spots in the road
__________________

Reply With Quote
  #8  
Old 04-16-2012, 02:08 AM
2damax Offline
New XRU Member
 
Posts: 9
iTrader Rating: 0
2012, silver
Mods: none
get the red drop(1.75in) springs for the front, and.... composite leafs(2.25in) "WITH".... QA1 shocks for the rears.... i llove it.... BETTER THAN STOCK....
Reply With Quote
  #9  
Old 04-16-2012, 08:35 AM
AmyGuyClayton's Avatar
AmyGuyClayton Offline

 
Location: Kingsland, Georgia
Posts: 496
iTrader Rating: 3
2008 SWB
Mods: Blue Sicspeed Shift Knob | Blue Nokya pedals | 6 inch polished SS antenna | Eclipse AVN 6620 | Ecplise SW4010 Sub | Grey/Black Leather rapped SubXClosore | Alpine MF450 V12 Amp | SWB Skull Rearview | Tinted Tails | CF 3rd Brake Light | FLM | iPex Chrome Halo Projectors | RBGM | 18" KMC650 Slides | Hood&Tailgate pinstriping by Doctor D |... TRD S/S | TRD CAI w/ Coupe "X-Runner" cover | URD polished 3" CBE | UniChip Programmer | Sttin Sic Track Package | QA1s | URD Traction Bar | BlackCat Custom Gauge |
All of our drop kits come with the low profile bump stops . Here is a photo of them installed. Their is no modification needed for installation.

Ride quality will improve with each upgraded suspension product.

Coils, Bumps and Blocks- Good
Coils, Blocks, Bumps and QA1 shocks- Better
Coils, composite/steel leafs, bumps, QA1 shocks- Best

You can always upgrade parts at any time.

If you have any questions you can call me anytime at 912-552-4744.

Thanks Amy

__________________
Amy Clayton 912-552-4744


"It's not how FAST you drive - it's how you drive FAST"
Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
quick question Rez146 Suspension 3 09-02-2011 10:34 AM
quick question! berthalamu General Off-Topic Discussions 6 11-11-2010 02:37 PM
Quick Question TRD-X Random Images 9 04-08-2010 04:41 PM
quick question? Xtacy Exterior Modifications 4 10-02-2008 05:51 PM
quick D3 question.... X_RUNNIN DVD Players / GPS Navigation 3 07-20-2008 05:55 PM



All times are GMT -5. The time now is 06:15 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vB.Sponsors
© 2006-2012 XR-Underground.com. All rights reserved.
XR-Underground.com is an independent Toyota enthusiast website specifically targeted toward X-Runner enthusiasts.
XR-Underground.com is not affiliated with Toyota Motor Sales, USA, Inc. The Toyota name and logo are trademarks owned by Toyota Motor Sales, USA, Inc.