Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

safety check stickers

Xer0 SiN

New Member
Joined
Nov 10, 2007
Messages
2,750
Reaction score
0
ladies and gents...

what is the proper way to take these stickers off...as careful as i am when i was taking it off my acura i chipped into some of the clear :argh:...and i dont want to do that to my my 4runner and x...i just want to go for that clean look by putting the stickers on the sheetmetal bracket ...thanks in advance
 

Deviant

New Member
Joined
Feb 19, 2007
Messages
1,239
Reaction score
0
Just use a razor blade as carefully as you can. Maybe a little heat to loosen the adhesive without burning your paint/plastic.
 

RossK35

Active Member
Joined
Mar 12, 2007
Messages
1,615
Reaction score
0
When I took mine off I used a brand new razor blade and it came off pretty easy. Using a heat gun would make it easier I think.
 

KX7

New Member
Joined
Oct 3, 2007
Messages
855
Reaction score
0
Use some masking or duct tape worked for me after I was done you couldnt tell there was a saftey sticker on the bumper before then I had all 3 stickers on my plate underneath the bumper....
 

Black-X

New Member
Joined
Feb 29, 2008
Messages
337
Reaction score
0
Use a heat gun to loosen up the glue, then carefully use a razor.
 

preXrunner

Active Member
Joined
Mar 16, 2008
Messages
1,808
Reaction score
0
yeah, i used a razor blade.. maybe some WD40, or some automotive Goo Gone... thats what i used :top:
 

nylesnakamasan

New Member
Joined
Dec 3, 2007
Messages
377
Reaction score
0
1. flat head screwdriver
2. ten minutes
3. goo gone
4. black sharpie to paint the scratches....:laugh:

yea use the heat and the razor blade!
 
Top Bottom