Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

1GR Aftermarket camshafts

Phracker

Member
Joined
Dec 28, 2015
Messages
41
Reaction score
0
Just out of curiosity, does anyone know the specs of the stock cams?
 

Torspd

Moderator
Staff member
Joined
May 25, 2008
Messages
14,814
Reaction score
54
Check on the 1st page. Those are the only specs that I could get at the time.
 

Nashman

Active Member
Joined
Oct 22, 2015
Messages
446
Reaction score
43
Now the big question is.... is it worth it spending 1000's on cam shafts


or just get them welded and them re ground
 

Torspd

Moderator
Staff member
Joined
May 25, 2008
Messages
14,814
Reaction score
54
Web Camshafts does what you mentioned. For the mere entry level fee of $1800.

Kelford might do it much cheaper. There may also be others... If you have any input Nashman?

Also, my most custom pieces, to lock out cam phasing. Due to the high lift of my cams.



 

Nashman

Active Member
Joined
Oct 22, 2015
Messages
446
Reaction score
43
Colt cams can do a re grind then gives you a spacer shim to go under the bucket hoping the 1grfe is shim on bucket or shim under backet then needing all new shims
 
Top Bottom