Recent content by mdd
-
Do These AFRs Sound Right?
No, you will make more power during wot at 14.7 than you will at 11-12. The question to ask is if the juice is worth the squeeze. You may only make a little more power with that lean of a tune, but you will run dangerously close to trouble. Ways you can get away with running leaner would be...- mdd
- Post #18
- Forum: F/I Mods & Tuning
-
URD Spec-U Exhaust
Any chance the equal length ypipe will be available to purchase? As to bolt in between factory layout.- mdd
- Post #86
- Forum: Underdog Racing Development (URD)
-
Is Servco Toyota serious?
If you got your xrunner through servco you should mention that too, as you're a returning customer. Anyway, check all of the different locations...each will give you different quotes. -
Need help reading these plugs !!
Color of the plugs look fine, taking into consideration that the motor is going through many different changes throughout 10k miles. What you're looking for is a shiny black that would indicate oil burning, but in the pictures it looks more like a soot black. You can tell that the plugs are too...- mdd
- Post #2
- Forum: F/I Mods & Tuning
-
Brock's non runner build
just saw this thread and see your delima about gauges...if its not too late to give you a suggestion, you should look into PLX devices. my setup consists of the dm100 touch, which is a touch screen multigauge that can read anything and everything all on one gauge. i have the sm-obd and sm-afr...- mdd
- Post #67
- Forum: Member Builds
-
-
-
End of The Year TACO CRUISE 2013
bummed i didnt get to stick around for H3. it was a nice day, thanks for putting it together -
End of The Year TACO CRUISE 2013
dang, i work at 12pm, so ill show face at nicos and roll out until waikiki. -
-
Super Werty vs "Master Toyota tech"
last time they made v6 single cabs was the 95.5-96 tacomas. i would love to have one!- mdd
- Post #34
- Forum: F/I Mods & Tuning
-
Super Werty vs "Master Toyota tech"
is this master tech saying he installed a trd sc in a 2wd single cab? thats news to me that they make a sc kit for the 4cyl! single cabs dont have the v6 option aka this guy is tripping- mdd
- Post #13
- Forum: F/I Mods & Tuning
-
boost gauge installed - questions
if youre going off trd claimed HP, that would be from the flywheel. whp should be roughly 260 give or take. usually there is a 15-20% loss through the drivetrain. im also in hi and i see 6psi. ive got a mechanical gauge. whered you go for dyno and how much?- mdd
- Post #13
- Forum: F/I Mods & Tuning
