DJM 3/3 Drop No Frame Cut

Snoopy_TXR · Apr 19, 2010

Finally got the DJM 3/3 drop done. In the front I used the DJM upper and lower control arms and bought the complete set of ball joints for each arm from ebay for about $85. My buddy pressed in the ball joints in for the control arms with his haudralic press so that part went well. For the rears, I only installed the 3" blocks and U bolts, NO FRAME CUTTING. Last of all I want to thank all the guys who responded to my thread regarding my install questions. Thanks guys!

Here is a picture of stock height:

This is the DJM 3/3 drop height:

SooRunner · Apr 19, 2010

Very nice! I want my front end to be that low but don't want the rub issue clearance if there are any.

Snoopy_TXR · Apr 19, 2010

SooRunner said:
Very nice! I want my front end to be that low but don't want the rub issue clearance if there are any.

Thanks! No rub issues for me.

lvxr · Apr 19, 2010

looks good....still gots the rake...but it looks much better then stock :top:

DJM DIRECT · Apr 19, 2010

looks great man im glad your happy with it. Honestly i think you should notch it and get the 4 inch rear block!!!

x20Runner05 · Apr 19, 2010

Looks good, does the 3/3 suppose to use a notch or is that just the 3/4?

TahoesHateMe · Apr 19, 2010

Do you ever carry anything in the bed?

redtoyxr · Apr 19, 2010

If you do carry stuff in your bed its gonna have a really bad harsh feeling. I got a 2 inch block on the back and its doesnt have a very nice ride when i place heavy things on the back.

azburnin · Apr 19, 2010

Ive Got the 3/4 djm, notched and all. yeah i threw some heavy stuff in it today had a little rougher ride but it didnt hop around when i hit the crappy road ( thanks alot hampton roads) A little weight kinda helps. The 3/3 doesnt look too bad

RedXRunner · Apr 19, 2010

So....what did you do with the c-notch?

Murderface · Apr 19, 2010

RedXRunner said:
So....what did you do with the c-notch?

Exactly cause I have money in hand for a notch:top:

Snoopy_TXR · Apr 19, 2010

lvxr said:
looks good....still gots the rake...but it looks much better then stock :top:

Thanks, I like it way more than stock too!

DJM DIRECT said:
looks great man im glad your happy with it. Honestly i think you should notch it and get the 4 inch rear block!!!

Thanks for the compliment and the smooth transaction! I actually c notched it and don't like the 4" rear because of the rear sitting lower than the front, I love the way it looks and I'm satisfied with the drop:top:

TahoesHateMe said:
Do you ever carry anything in the bed?

Yes I do, I just loaded the bed full of a choped topper, a celica trunk and bumper to get recycled today and it was fine.

RedXRunner said:
So....what did you do with the c-notch?

Yea I used the C notch because the stock ones are too small for the 3" block.

ChristDenied said:
Exactly cause I have money in hand for a notch:top:

Sorry all I have left is the rear brackets for the frame.

Kailua-X-Runner · Apr 20, 2010

i think it looks cherry !!!
i was looking at getting the DJM 3/4, but didnt wanna do the notch either...
so mahalo for the thread...
what size tires u running wit da 20's?

Murderface · Apr 20, 2010

I'm with u bro, I think it looks better 3/3 then 3/4.:top:

Slywhitty · Apr 20, 2010

how did you install the notch with no frame cutting???? First post and title says no cutting. but then you said u installed the notch. kinda hard to do without cutting i think??

Murderface · Apr 20, 2010

Slywhitty said:
how did you install the notch with no frame cutting???? First post and title says no cutting. but then you said u installed the notch. kinda hard to do without cutting i think??

Read it again u HOSER:canada:

Slywhitty · Apr 20, 2010

I am confused:dontknow::dontknow:

Yea I used the C notch because the stock ones are too small for the 3" block.

Sorry all I have left is the rear brackets for the frame.[/QUOTE]

wouldnt the brackets for the frame be the c notch?????]

I dont think he installed the notch.. Think he is confused with bumpstops or u bolts. i may be a stupid Canadian so maybe the op could clarify??

Murderface · Apr 20, 2010

I got dibs on the notch if he wants to
sell it to me.

FYI Those brackets that are for the frame are the frame notch. Ubolts hold the blocks and leafs onto the axle

Slywhitty said:
I am confused:dontknow::dontknow:

Yea I used the C notch because the stock ones are too small for the 3" block.

Sorry all I have left is the rear brackets for the frame.

wouldnt the brackets for the frame be the c notch?????]

I dont think he installed the notch.. Think he is confused with bumpstops or u bolts. i may be a stupid Canadian so maybe the op could clarify??[/QUOTE]

Bill u read it right I was just being an ass

Snoopy_TXR · Apr 20, 2010

Kailua-X-Runner said:
i think it looks cherry !!!
i was looking at getting the DJM 3/4, but didnt wanna do the notch either...
so mahalo for the thread...
what size tires u running wit da 20's?

I am running 255/35 for the front and 275/35 for the rears.

Slywhitty said:
I am confused:dontknow::dontknow:

Yea I used the C notch because the stock ones are too small for the 3" block.

Sorry all I have left is the rear brackets for the frame.

wouldnt the brackets for the frame be the c notch?????]

I dont think he installed the notch.. Think he is confused with bumpstops or u bolts. i may be a stupid Canadian so maybe the op could clarify??[/QUOTE]

Sorry for the confusion lol. I used the DJM U bolts for the 3" block and did not use the frame notch.

Murderface · Apr 20, 2010

PM sent about the notch:top:

Welcome!

DJM 3/3 Drop No Frame Cut

New Member

New Member

New Member

Member

Member

New Member

New Member

New Member

Active Member

"Splash Baby Douchecanoe"

New Member

New Member

New Member

New Member

"Midget Magnet"

New Member

"Midget Magnet"

New Member

New Member

New Member

Forum statistics

Online statistics

Stay Connected