URD MKI S/C kit for sale

pumo420 · Jan 29, 2011

x-driver21 said:
sorry for me asking the same questions but this kit (as is) plus some fluid, and pully. It would run Correct? it would be lean but it would be able to run without harming the truch right? and i thought i saw someone say there was no 7th injector, so do i have to buy 1 for the fuel rail tap.
Will it run without this 7th injector?

also how long is URD electronics garunteed to work? i would hate to but this kit and get everything for it and the injectors not to work

i was also talking to a guy (just a stranger i met) said i need a boost controller. im not seeing that included but is that real or if it is, is it necessary?
sorry for all the qeustions[/QU

the supercharger already has the pulley on it so your not going to need that, i believe its the 75 mm so you will need the walbaro 255 fuel pump, the serpentine belt, traction fluid and the the fuel tap if thats not included. you just need the fuel tap to connect to the 7th injector.

the electronics in the kit will work, you just need to pay attention when following the wiring schematic when installing the piggy back system.

you wont need a boost controller.

x-driver21 · Jan 29, 2011

so if i were to buy this kit i would have to buy more than just a new intake filter, fluid, and fuel rail tap?

pumo420 · Jan 31, 2011

x-driver21 said:
so if i were to buy this kit i would have to buy more than just a new intake filter, fluid, and fuel rail tap?

it looks like it comes with a intake filter so you wouldn't need a new one. but you should get the walboro 255 fuel pump http://www.urdusa.com/Fuel-Upgrades...t_info.html?osCsid=42ot4lc37qkfan47es75ummo07

livinginsa · Jan 31, 2011

A lot of people don't have the bigger fuel pump with their sc. I didn't install my Walboro 255 fuel pump or my 7th injector until I had the TRD sc for months.

You can always just get what you need to get it going, and then install a smaller pulleye, a Walboro 255 fuel pump, and the 7th injectory, later. It doesn't need to be done all at once.

I am surpised that this isn't sold, yet. URD makes really good sc.

Torspd · Jan 31, 2011

Boost controllers are for turbos. Acts as a secondary spring to the one in the wastegate. Nothing there have anything to do with this kit.

This boost is built and maintained by the pulley diameter. The MK I was built to work with that ecu. It will work just fine. If you want to upgrade to a better one, there are options for that as well. It will work just fine though.

X-roller · Jan 31, 2011

blackx-runner said:
Free :top:

Don't know if this will help or not, but I labeled what all the different parts shown in the picture are. :top:

Anyone else notice the pump is missing?....... That is a huge part of the kit.....

Pump - Missing
Fuel Rail Tap - Missing

x-driver21 said:
sorry for me asking the same questions but this kit (as is) plus some fluid, and pully. It would run Correct? it would be lean but it would be able to run without harming the truch right? and i thought i saw someone say there was no 7th injector, so do i have to buy 1 for the fuel rail tap.
Will it run without this 7th injector?

also how long is URD electronics garunteed to work? i would hate to but this kit and get everything for it and the injectors not to work

i was also talking to a guy (just a stranger i met) said i need a boost controller. im not seeing that included but is that real or if it is, is it necessary?
sorry for all the qeustions

Run lean will blow the motor...... The 7th injector is a must on this kit because it gives that extra bit of fuel to get the afr right.

No boost controller is needed. That is for a waste gate which this s/c kit does not have.

but as far as I can see..... there is a few things missing from this kit.....

Pump, Fuel rail tap, a bung for the afr gauge, and also a the sensor for the afr gauge.....

blackx-runner · Jan 31, 2011

X-roller said:
Anyone else notice the pump is missing?....... That is a huge part of the kit.....

Pump - Missing
Fuel Rail Tap - Missing

Run lean will blow the motor...... The 7th injector is a must on this kit because it gives that extra bit of fuel to get the afr right.

No boost controller is needed. That is for a waste gate which this s/c kit does not have.

but as far as I can see..... there is a few things missing from this kit.....

Pump, Fuel rail tap, a bung for the afr gauge, and also a the sensor for the afr gauge.....

What pump are you talking about?? The water pump and harness is there.

X-roller · Jan 31, 2011

blackx-runner said:
What pump are you talking about?? The water pump and harness is there.

I think that is just the harness..... I can't see the pump behind it.... I may be wrong though....

blackx-runner · Jan 31, 2011

X-roller said:
I think that is just the harness..... I can't see the pump behind it.... I may be wrong though....

pretty sure the pump is behind it still attached to the bracket.

X-roller · Jan 31, 2011

If ya say so. :top: I guess it's there. I would just make sure before buying it. Just trying to help a fellow xru brotherin out.

blackx-runner · Jan 31, 2011

X-roller said:
If ya say so. :top: I guess it's there. I would just make sure before buying it. Just trying to help a fellow xru brotherin out.

Definitely make sure before money is exchanged. There is alot of guys trying to help out here, and like you have seen and quoted some wrong information has been posted - not purposely, but just by people not knowing this kit, or confusing it with TRD-
Its getting kind of confusing and cluttered.

x-driver21 · Jan 31, 2011

hey black x im sending you pms but they're not appearing in outbox, but the messages im responding to say "replied" and i dont know if your recieving them, any ideas?

blackx-runner · Jan 31, 2011

x-driver21 said:
hey black x im sending you pms but they're not appearing in outbox, but the messages im responding to say "replied" and i dont know if your recieving them, any ideas?

working fine.... I responded to them all even though they are the same message over and over..... :rolleyez:

x-driver21 · Jan 31, 2011

oooppppsss sorry dude

x-driver21 · Jan 31, 2011

and hey seller of this kit shoot me a pm. a fellow member is beginning to shed some light on the subject and maybe we could work something out

toyota06RR-XR · Jan 31, 2011

PM sent,

yes thats the pump is behind the harness.

Thanks everyone for they help on giving me input on what i have, Last thing I would want is to selling someone a kit and know know what there getting.

lance426 · Feb 2, 2011

any chance of getting a new full parts lists and anything that the buyer will have to have to get this kit fully installed and running at minimum would be greatly appreciated to us newbies.

Scarface · Feb 2, 2011

This thing still up for sale?

x-driver21 · Feb 2, 2011

nope it is sold!!!!

Welcome!

URD MKI S/C kit for sale

New Member

Member

New Member

New Member

Moderator

Active Member

"White Flash"

Active Member

"White Flash"

Active Member

"White Flash"

Member

"White Flash"

Member

Member

New Member

New Member

Active Member

Member

Forum statistics

Online statistics

Stay Connected