Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Turn signals stop working HELP!!

x-runner808

New Member
Joined
May 22, 2008
Messages
170
Reaction score
0
Hey guys so my hazards and turn signals stop working.
Turn signals on the gauge cluster and outside don't blink
I tested all fuses in both the fuse boxes changed the flasher relay behind the fuse box under the dash,
I also tried using another hazard switch but nothing.
Any one else had this happen and know what's wrong ?
And yes I did check all bulbs. Lol
 

Whitebeauty

New Member
Joined
Oct 15, 2011
Messages
5,237
Reaction score
0
Dang man...u sure those relays r good...according to what u listed the whole system just took a sht...
 

SpeedX

New Member
Joined
Mar 9, 2007
Messages
165
Reaction score
0
What about the relays inside the fusebox next to your battery? Have you checked your connections at the bulb holders?
 

scoutdeed69

New Member
Joined
Mar 8, 2011
Messages
222
Reaction score
1
might be your turn signal switch...you need the etm or schematic of the circuit for both switch's to figure that out...sorry i don't have either to help you! Thats the 1st i have heard of this! Good luck

Rob
 
Top Bottom