DJM 2 inch kit??? Would you be interested?

GillMAN · Oct 3, 2013

Adjustable A arm

If not a drop, how about an adjustable a arm for those who have a 1.75 or similar already installed?

I would be all over it.

AZ Sun Lover · Oct 5, 2013

GillMAN said:
If not a drop, how about an adjustable a arm for those who have a 1.75 or similar already installed?

I would be all over it.

Me Too!

Tony,
Your friends at DJM need to change their "attitude".

From my reading their "powder coating" is not the best! So I called to ask if I could buy uncoated arms. Your friends told me FLAT NO! Plus I have read more than once about other issues. I think most of us bought a Toyota because they have good reliability.

From my reading DJM needs a little attitude adjustment.

Pretend you know nothing about DJM and this is the first thing you see about a Co.

http://www.xr-underground.com/vb3/showthread.php?t=50948

Many ways to lower the front, it's just that we can't find a way to get the alignment with-in specs. The truck is not a sports car that calls for Neg Camber. I *think* longer upper A-Arms would be a good seller! (?)

Tony your quite the gentleman, per my phone call with you. Just want to say THANKS for your help & advice.

Regards,
AZ

DJM DIRECT · Oct 5, 2013

GillMAN said:
If not a drop, how about an adjustable a arm for those who have a 1.75 or similar already installed?

I would be all over it.

The upper arms by themselves work from a 1 to 3 inch drop

AZ Sun Lover said:
Me Too!

Tony,
Your friends at DJM need to change their "attitude".

From my reading their "powder coating" is not the best! So I called to ask if I could buy uncoated arms. Your friends told me FLAT NO! Plus I have read more than once about other issues. I think most of us bought a Toyota because they have good reliability.

From my reading DJM needs a little attitude adjustment.

Pretend you know nothing about DJM and this is the first thing you see about a Co.

http://www.xr-underground.com/vb3/showthread.php?t=50948

Many ways to lower the front, it's just that we can't find a way to get the alignment with-in specs. The truck is not a sports car that calls for Neg Camber. I *think* longer upper A-Arms would be a good seller! (?)

Tony your quite the gentleman, per my phone call with you. Just want to say THANKS for your help & advice.

Regards,
AZ

the control arms they only do for me on my version arms in black. THey will not sell them uncoated it has ben like that for years. there are 2 versions on the control arms MANY places still sell old stock of the old version which changed years ago.

I can get the upper a arms by themselves which are longer and 280 shipped

ezjam · Oct 5, 2013

If I am using the URD 1.5 inch drop should I use your DJM upper arms? What advantage is there to that?

AZ Sun Lover · Oct 5, 2013

DJM DIRECT said:
The upper arms by themselves work from a 1 to 3 inch drop

the control arms they only do for me on my version arms in black. THey will not sell them uncoated it has ben like that for years. there are 2 versions on the control arms MANY places still sell old stock of the old version which changed years ago.

I can get the upper a arms by themselves which are longer and 280 shipped

Tony,
So you can get the Tacoma longer upper arms in black for $280 shipped?

If so I may have to wait another mo. to pay off the truck.

*Edit: Tony I read DJM will press in greasable balljoints for $25 each? Also would they be Moog balljoints?

Thanks,
AZ

krisxrunner · Oct 5, 2013

I would love a 2/2 drop just to have a lower ride but not lose my ride comfort.

AZ Sun Lover · Oct 5, 2013

krisxrunner said:
I would love a 2/2 drop just to have a lower ride but not lose my ride comfort.

This is the system I went with. You just need to move the "dust boot space" on the Bilstein shocks under the top nut. Use the TR new bump stop. Tom @ TR is great to work with. Some how I got more than 1.5 inches of drop. Tom machine me spacers to raise the front up some, so I can get less camber. Tom didn't charge me a red cent!

But if I can buy longer upper control arms to fix my alignment issue I'm good to go.

On the rear I went with Pre-runner springs & 1" blocks with no issues! If I can get the front right I might order 1.5" rear blocks from Tom.

http://tundraracing.com/xrunnerdropkit.htm

AZ

DJM DIRECT · Oct 5, 2013

camber fixed and balljoint angle is better

AZ Sun Lover · Oct 5, 2013

DJM DIRECT said:
camber fixed and balljoint angle is better

In Black shipped for $280.00 ?

If so is your PayPal account same as your email?

*Edit: Tony, I can't find a photo of a weld-in rear notch by DJM.

AZ

GillMAN · Oct 6, 2013

AZ Sun Lover said:
In Black shipped for $280.00 ?

If so is your PayPal account same as your email?

*Edit: Tony, I can't find a photo of a weld-in rear notch by DJM.

AZ

ill be doing the same, any chance we can get a group buy going?..

Nocturnal Emission · Oct 6, 2013

If this group buy goes thru, count me in.

hrspwr236 · Oct 6, 2013

I would be interested in a 2/2!

scoutdeed69 · Oct 6, 2013

I would be interested in the front upper control arms myself!

Rob

Coupe · Oct 6, 2013

I would be interested.

AZ Sun Lover · Oct 6, 2013

Hmm...
Tony, I would bet you could most likely get a dozen plus sells from this web site!

http://www.tacomaworld.com

AZ

Phil Dammit · Oct 6, 2013

DJM DIRECT said:
The upper arms by themselves work from a 1 to 3 inch drop

the control arms they only do for me on my version arms in black. THey will not sell them uncoated it has ben like that for years. there are 2 versions on the control arms MANY places still sell old stock of the old version which changed years ago.

I can get the upper a arms by themselves which are longer and 280 shipped

Why did they stop offering the longer ones with the normal kit? I'm most likely going to heim my uppers as I am only at a degree and a half with 4.5" of drop. So I can pull them back in.

AZ Sun Lover said:
In Black shipped for $280.00 ?

If so is your PayPal account same as your email?

*Edit: Tony, I can't find a photo of a weld-in rear notch by DJM.

AZ

They don't, I told you this month's ago.

burnboy · Oct 6, 2013

In............

AZ Sun Lover · Oct 7, 2013

Phil Dammit said:
Why did they stop offering the longer ones? I'm most likely going to heim my uppers as I am only at a degree and a half with 4.5" of drop. So I can pull them back in.

They don't, I told you this month's ago.

Phil,
Tony said he can sell the ugly powder coated ones for $280.00 shipped! Now go play jacks in the freeway!

:biggrin:

Phil Dammit · Oct 7, 2013

AZ Sun Lover said:
Phil,
Tony said he can sell the ugly powder coated ones for $280.00 shipped! Now go play jacks in the freeway!

:biggrin:

Why don't you try reading that post again *facepalm*

Edited for your clarity

GillMAN · Oct 7, 2013

Group buy

I spoke with Tony: DJM Direct.

He approved a group buy of DJM Upper Control Arms.
Color: Black and Gray Splatter.

If we get 10 orders he will be able to lower the price to $260 Shipped for Continental US.

Add yourself to the list if you are in:

1) GillMan

Welcome!

DJM 2 inch kit??? Would you be interested?

New Member

Banned

Member

Member

Banned

New Member

Banned

Member

Banned

New Member

New Member

Active Member

New Member

Active Member

Banned

Member

New Member

Banned

Member

New Member

Forum statistics

Online statistics

Stay Connected