Will it fit? 19" Varrstoens

lvxr · Feb 11, 2014

Hey guys. Long time no talk but I need ur guys' help. My roommate used my truck and ruined 3 of my wheels, so now im left either replacing 3 wheels, or buying a entire new set. Someone local has a set of varrstoens listed on craigslist, but will it fit? I know the front will because i've seen it before, but im not so sure about the rear.

SPECS:
Front: 19x9.5 +12
Rear: 19x10.5 +12

Truck is 3/4 DJM dropped.

Im not scared to cut/trim....but are the 10.5 rears pushing it?

Thanks fellas!

lvxr · Feb 11, 2014

I guess i shouldve tried searching first. sorta got my answer, saw a truck with the exact wheels on it, but it wasn't DJM'd. Now im wondering how much fender-hacking im gonna have to do to make it work

hrspwr236 · Feb 11, 2014

K2 is running a similar set up but I believe his was not staggers but even with 9.5 and 3/4 drop I believe he needed some trimming for driving clearance and can more than assume you will be in the same boat.

NHXRUNNER · Feb 11, 2014

Where's Grumpy when you need him.....

MORT-RUNNER · Feb 11, 2014

Your gonna bust your flairs on the rear is you put these on. I've already seen these and contemplated the same thing. If the rear was a +22, you could get away with it, but if it was me, I wouldn't risk it. It will stick out a lot more than you think.

NHXRUNNER · Feb 11, 2014

At 10.5" wide and a +12 you'll extend 50mm (~2") beyond stock. So if you measure out 2" from the edge of your stock wheel, that's where the new wheel would sit. Hope this helps. :top:

*IrunnIt* · Feb 11, 2014

The rear has to get trimmed, I've got 10.5 +15 I'm using a 3 inch block in the back . Just get longer bump stops if you dont already have them.

lvxr · Feb 11, 2014

*IrunnIt* said:
The rear has to get trimmed, I've got 10.5 +15 I'm using a 3 inch block in the back . Just get longer bump stops if you dont already have them.

the longer bump stop is exactly what i was thinking. I was gonna fab something up.

im currently running a 20x10 +20 right now, and my driver side rear-flare is taking a beating on big dips. from some sort of calculator i found, 19x10.5 +12 would stick out an extra 14mm (.55 inches) compared to what I have now.

ALTERNATIVELY, what do you guys think about these? varrstoen has a special on them right now! The ES3's

19x9.5 +12 Hyper Black:

Clifford · Feb 11, 2014

They will fit, how much trimming you have to do will depend on what tire size you want to run.

hrspwr236 · Feb 11, 2014

The es3 looks good and that is probably the perfect set up for you, if it's a good deal I would jump on it , I have seen those for around 750 locally for sale.

lvxr · Feb 11, 2014

hrspwr236 said:
The es3 looks good and that is probably the perfect set up for you, if it's a good deal I would jump on it , I have seen those for around 750 locally for sale.

it's for $760 direct from varrstoen. not sure what shipping would be. my personal preference has me leaning toward the TE37 replicas tho

hrspwr236 · Feb 11, 2014

ES2 all day long in my opinion, hoping someone buys my wheels so I can get a set!

TheAngeryGinger · Feb 11, 2014

I have been thinking about selling mine and getting a set of ES 5's. The ES 3's are pretty sweet too.

boxerpicker · Feb 13, 2014

you can buy a set and i put them in my truck then ill tell you if it fits

Hard Taco · Jun 30, 2014

What was the end results of this discussion?

Welcome!

Will it fit? 19" Varrstoens

lvxr

Member

lvxr

Member

hrspwr236

Active Member

NHXRUNNER

"New Hampster"

MORT-RUNNER

Active Member

NHXRUNNER

"New Hampster"

IrunnIt

Active Member

lvxr

Member

Clifford

because race truck

hrspwr236

Active Member

lvxr

Member

hrspwr236

Active Member

TheAngeryGinger

Member

boxerpicker

Member

Hard Taco

Formerly Known As "Sn3akrs"

Forum statistics

Latest posts

Online statistics

Stay Connected