Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Tommys 2006 Speedway Blue

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
BTLM, power stop brake kit, supercharger pulley, and fuel pump upgrade..... in no specific order
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
do it man! it was really easy. just need a soldering gun and we used some tweezers to hold the LEDs cause they were about 1/4 the size of a pea
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
thanks man! can't believe i waited so long to do these mods. a little paint, some silicone, and some LEDs cost all of $30 to do the BHLM, gauge cluster, and EVO mod
 

Torspd

Moderator
Staff member
Joined
May 25, 2008
Messages
14,814
Reaction score
54
Looks great man. Possible calander pictures. :top:
 

hrspwr236

Active Member
Joined
Jul 2, 2007
Messages
8,886
Reaction score
4
Really great photos, truck looks good with all the recent modifications!
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
thanks guys! i've wanted to do these mods since i got the truck. $30 and a days work was definitely worth it!
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
so tomorrow morning i'm doing the fuel pump upgrade and 2.825" pulley. seems pretty straight forward and i have some help but is there anything i should be concerned with? i remember a thread a while back about not over tightening the clamps for the fuel lines...i think there were a few guys that had problems with over tightening and ending up with cracked fuel lines :dontknow:
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
Your just getting to the 2.8 pulley now? you had it sitting for quite a while lol

haha ya i know.... fuel pump was a breeze to do. totally wrecked the stock pulley getting it off and the new pulley went on so easy we didn't even need the press fit tool. we heated it up quite a bit and i just slid it on by hand. accidentally pushed it on a tad too far (about 2mm past being flush) but seems to be fine. everythings running great but probably should get a wideband and do some tuning. make sure the afr is safe
 

ToyotaTacoma4Ever

New Member
Joined
Oct 11, 2012
Messages
614
Reaction score
0
haha ya i know.... fuel pump was a breeze to do. totally wrecked the stock pulley getting it off and the new pulley went on so easy we didn't even need the press fit tool. we heated it up quite a bit and i just slid it on by hand. accidentally pushed it on a tad too far (about 2mm past being flush) but seems to be fine. everythings running great but probably should get a wideband and do some tuning. make sure the afr is safe

Awesome, glad it went well! You must have had that pulley HOT to slide on by hand haha

Good to know that a second hand pulley is still fine :) defenitly would check your AFR's after that install
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
Awesome, glad it went well! You must have had that pulley HOT to slide on by hand haha

Good to know that a second hand pulley is still fine :) defenitly would check your AFR's after that install

haha ya after seeing how much it took to pull the stock pulley off we thought we better heat it up well to get it on and i didn't expect it to go on so easily. after like 5 seconds though the pulley wouldn't budge at all
 

06 xrunner

New Member
Joined
Dec 21, 2012
Messages
556
Reaction score
0
Right on man you finally got them done. You been talking bout them for awhile. So what's next on the list?
Too bad we didnt meet up again before I sold the X we could have swapped taillights
 

TommyXrunner

Active Member
Joined
May 22, 2012
Messages
1,859
Reaction score
0
Right on man you finally got them done. You been talking bout them for awhile. So what's next on the list?
Too bad we didnt meet up again before I sold the X we could have swapped taillights

next on the list would be to put my new rotors and pads on. probably get a wideband and boost gauge. see if i can do any tuning on my maf cal. don't know how its going to work with the re-flash for the supercharger though
 
Top Bottom