Coupe
Active Member
- Joined
- Dec 31, 2007
- Messages
- 6,871
- Reaction score
- 15
Doing a few upgrades to the Coupe.
New Aluminum heads. Slightly smaller chambers.
New Cam.
New 8 stack, down draft weber set up. I powder coated the intake a textured black. Custom made the air cleaners. Also did a black/red powdercoat on the covers.
Some roller rockers to go along with the cam & heads.
I
I redid the valve covers with a matching black/red powder coat.
I made a new set of headers. This dumps into a stainless exhaust, but I decided to plasma coat everything.
Since
I had everything torn apart, I decided to add an Air Ride system.
I still have a ways to go, before everything is fully functional.
New Aluminum heads. Slightly smaller chambers.
New Cam.
New 8 stack, down draft weber set up. I powder coated the intake a textured black. Custom made the air cleaners. Also did a black/red powdercoat on the covers.
Some roller rockers to go along with the cam & heads.
I I redid the valve covers with a matching black/red powder coat.
I made a new set of headers. This dumps into a stainless exhaust, but I decided to plasma coat everything.
Since I had everything torn apart, I decided to add an Air Ride system.
I still have a ways to go, before everything is fully functional.
