justin13703

Active Member

Joined

Sep 9, 2010

Messages

2,771

Reaction score

17

• Feb 19, 2012

• #21

gsxrdoug said:

Tahoe I'm in your shoes I tote my bikes around and like the fact there is some low end grunt and really don't want to worry about changing to much that will require attention in the long run, just wondering if OEM or OEM copy would work for daily. I'm sure OEM is not cheap either.

Click to expand...

You guys could probably do the steel flywheel, that would help you out both ways. Still has more mass than the aluminum one, but is lighter than stock. I have the steel flywheel and stage 3+ clutch and I've hauled a gsxr1000 in the back with 4 people in the truck at one time and it didn't give me any problems at all. I guess it depends on how much you tow and how often though. But the steel flywheel is a nice compromise.

 

TahoesHateMe

New Member

Joined

Mar 11, 2007

Messages

1,115

Reaction score

0

• Feb 20, 2012

• #22

1 bike, sometimes 2 bikes. And I have a 91 Jetta GLI trackcar that I ran in a 24hrs of Lemons. Thinking of getting a small toybox trailer for the bike and camping. I can get OEM parts cost +20% aftermarket replacement parts for wholesale.

 

Baggins44

Active Member

Joined

Jan 23, 2010

Messages

1,402

Reaction score

0

• Jun 6, 2012

• #23

THREAD REVIVE

is it ok to run a urd stage 2 or 3 with the stock flywheel?

my clutch went out today, dont have enough money to pay someone to do it, so im having at it. just dont know if I should get a stage 2 or 3.

 

hottacoX

Moderator

Staff member

Joined

Dec 21, 2009

Messages

4,823

Reaction score

3

• Jun 6, 2012

• #24

It's ok to run a 2 or 3 with the stock fly, you should just get it resurfaced by a shop for like $50 or so. And IMO I would go stage 3:top:

 

sonic555u

Member

Joined

Aug 1, 2007

Messages

251

Reaction score

10

• Jun 6, 2012

• #25

Durability

Thats weird I have had my truck 5 years and 80,00 miles and my oem clutch is perfectly fine and I drive my x-runner crazy as hell. How do you guys know if your clutch is going bad?

 

S

spicciani2

Member

Joined

Feb 22, 2018

Messages

86

Reaction score

14

• Mar 1, 2019

• #26

NECRO POST!!!!!

Hey I cant decide between Exedy tyk1515 and tyk1503... Is there a difference? According to rock auto the FJ cruiser uses 1503 and xrunner 1515 but I thought they were the same... I assume I'll want the URD TOB as well. Also I'm trying to decide which of these is the proper rear main seal. (national part number 710416 ?)
Should I just go ahead and replace both master and slave cylinders?

 

NHXRUNNER

"New Hampster"

Staff member

Joined

Jul 30, 2007

Messages

8,001

Reaction score

305

• Mar 1, 2019

• #27

What's the cost of these Exedy clutches? If it were me I'd go OEM or URD.

 

S

spicciani2

Member

Joined

Feb 22, 2018

Messages

86

Reaction score

14

• Mar 1, 2019

• #28

okay youre right for another $60 ($260) I should just get the Aisen CKT057
https://www.rockauto.com/en/catalog...6,1441488,transmission-manual,clutch+kit,1993

 

S

spicciani2

Member

Joined

Feb 22, 2018

Messages

86

Reaction score

14

• Mar 1, 2019

• #29

But how about the slave and master cylinders should i bother?

 

NHXRUNNER

"New Hampster"

Staff member

Joined

Jul 30, 2007

Messages

8,001

Reaction score

305

• Mar 1, 2019

• #30

If they haven't failed I'd let them ride. I've got 216K on mine....:::::::knock on wood:::::::