MSR 093, will it fit?

[raziug]

Hey all, saw a set of msr 093's on an infinity, checked the manufacturers website and it turns out they make them in 20's (what I'm looking for) does anyone know if these would fit my 13 x runner properly? Also what tire size would you all recommend? 275 40 20?

Thanks
Larry

 

[GR6RR]

what are the widths and offsets?

 

[raziug]

PART # SIZE FINISH PATTERN OFFSET BSM CAP # LOAD SHIP WT.

0932-2012 20.0x10.0 Superfinished with Black center 5 on 4.5 24 6.383 3213-00 1580 N/A
0932-2021 20.0x10.0 Superfinished with Black center 5 on 120 14 5.989 3213-00 1580 N/A
0932-2022 20.0x10.0 Superfinished with Black center 5 on 112 24 6.383 3213-00 1580 N/A
0932-2028 20.0x10.0 Superfinished with Black center 5 on 4.5 40 7.013 3213-00 1580 N/A
0932-2099 20.0x10.0 Superfinished with Black center 5 on 120 40 7.013 3213-00 1580 N/A
0932-2812 20.0x8.5 Superfinished with Black center 5 on 4.5 24 5.633 3213-00 1580 N/A
0932-2815 20.0x8.5 Superfinished with Black center 5 on 115 14 5.239 3213-00 1580 N/A
0932-2816 20.0x8.5 Superfinished with Black center 5 on 115 40 6.263 3213-00 1580 N/A
0932-2821 20.0x8.5 Superfinished with Black center 5 on 120 14 5.239 3213-00 1580 N/A
0932-2822 20.0x8.5 Superfinished with Black center 5 on 112 24 5.633 3213-00 1580 N/A
0932-2828 20.0x8.5 Superfinished with Black center 5 on 4.5 40 6.263 3213-00 1580 N/A
0932-2835 20.0x8.5 Superfinished with Black center 5 on 100 40 6.263 3213-00 1580 N/A
0932-2899 20.0x8.5 Superfinished with Black center 5 on 120 40 6.263 3213-00 1580 N/A

 

[GR6RR]

Staggered setup:
0932-2012 20.0x10.0 Superfinished with Black center 5 on 4.5 24 6.383 3213-00 1580 N/A
0932-2812 20.0x8.5 Superfinished with Black center 5 on 4.5 24 5.633 3213-00 1580 N/A

Big arse difference in widths.
Most replica wheel companies do it like this. 8.5 fronts. hahahhaha

If I only had a choice of only these wheels, I'd go a square setup of:

0932-2012 20.0x10.0 Superfinished with Black center 5 on 4.5 24 6.383 3213-00 1580 N/A

But it's not me... LOL

If you have the money, I'd buy those Weds off of Toon here on the forum.