Varrstoen wheels?

[RMCO]

for the money you cant beat them, be careful though I bent one already pretty bad. pot holes are not your friend!

Any pics of the damaged wheel? Not that I have a lot of potholes to worry about down in Florida, but if I drive my truck back up to Detroit to visit family it would be like driving through a minefield in Michigan trying to avoid them if the wheels bend easily, haha.

 

[ultraxr]

with a 19x10.5, what would be a preferred offset with a 2.5" drop in the rear?

 

[akakrill]

with a 19x10.5, what would be a preferred offset with a 2.5" drop in the rear?

Depends on your tire width

 

[Tunedx]

Might want to consider the width of tire u choose because there might be limited tire manufactures.

 

[ultraxr]

how about 275/40 Hannook Ventus EVO V12 on the 19x10.5???

 

[akakrill]

I just bought those tires...275 is 10.8 inches wide. I got a 19x9.5 inch rim +12mm That's going to flush it out 1.1 inches. The 10.5 wide at 12mm offset will be exactly the same, 1.1 inches. The bead of the tire will just be an inch further apart than on mine. A 275 series fits on rim widths from 8.5 to 10.5. The narrower the rim, the more rolled the edges of the tire will be. I want to say the fenders are closer to 1.25 from the stock tire

 

[ultraxr]

whoa... kind got confused.

you mean, the more narrow the rim the more square the tire will be. The wider the rim, the edge will be more rolled/rounded.

 

[akakrill]

no...narrow rim = rolled rounded......wide rim = squared