Wiring Compent speakers??

[BlackXrunner05]

Im thinking about buying 2 sets of two way speakers with a 4 ohm impedance .What would be the best way to wire them with the cross over . Do I wire them together in series ? do i wire the tweeters and mids seperate? And would i use a 4 channel amp? I think Ive got sub wiring down I'm just a bit confused about the speakers ......Any advice ??

 

[jockin my styLez]

if you're hooking up components they should come with a crossover
wires will go from your mid to the mid output on the crossover
wires will go from your tweeter to your tweeter output on your crossover
then from the input on the crossover those wires will go to your amp

if you're buying 2 sets id suggest going with a 4 channel amp
that way all 4 sets of mids n tweets can be run off of one amp 1 per channel

 

[5H4D0WD347H]

if you're hooking up components they should come with a crossover
wires will go from your mid to the mid output on the crossover
wires will go from your tweeter to your tweeter output on your crossover
then from the input on the crossover those wires will go to your amp

if you're buying 2 sets id suggest going with a 4 channel amp
that way all 4 sets of mids n tweets can be run off of one amp 1 per channel

w0000t +1 .............

 

[BlackXrunner05]

yeah was really confused wiring really isnt my forte lol thanks for the advice