Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Reverse Camera Installed

K96732

New Member
Joined
Jul 17, 2012
Messages
10
Reaction score
0
My Quality from my reverse camera to my kenwood double din.
Was to Difficult to run the wire from the back to head unit
 

Attachments

  • IMG_0976.jpg
    IMG_0976.jpg
    86.1 KB · Views: 278

Celiblue

New Member
Joined
May 19, 2007
Messages
451
Reaction score
0
Do you have any pictures of the camera mounting position?
 

Workman3886

Active Member
Joined
Jul 20, 2011
Messages
1,358
Reaction score
2
I was wondering the same thing, i know they have the tailgate handle camera, and the license plate frame one, did you use one of those?
 

JiNsEiGaNaI

Active Member
Joined
Feb 20, 2011
Messages
1,424
Reaction score
4
i wanna say licence plate! cheapest n easiest rear view camera
 

Nick_c

New Member
Joined
Feb 21, 2013
Messages
305
Reaction score
0
My Quality from my reverse camera to my kenwood double din.
Was to Difficult to run the wire from the back to head unit

Looks great ....let us see a pic of the camera.
 

Whitebeauty

New Member
Joined
Oct 15, 2011
Messages
5,237
Reaction score
0
Theres all kinds of cameras u can get with different mounting options. It would all depend on your prefence. I would think that whole run of wire from the rear to the front would be a hassle. Of course it could be done but must be a pain.
 

STONER-X

Active Member
Joined
May 15, 2008
Messages
3,372
Reaction score
1
Theres all kinds of cameras u can get with different mounting options. It would all depend on your prefence. I would think that whole run of wire from the rear to the front would be a hassle. Of course it could be done but must be a pain.

Its not all too bad... when I ran the wires for my power tailgate lock I used the harness hole under the drivers seat and secured it to the frame....

I could imagine getting the right length from the back to tithe head would be a little tougher though. Lets see where you mounted the camera it looks like a great spot that you picked
 

roy365

New Member
Joined
Jul 21, 2008
Messages
480
Reaction score
1
Its not all too bad... when I ran the wires for my power tailgate lock I used the harness hole under the drivers seat and secured it to the frame....

I could imagine getting the right length from the back to tithe head would be a little tougher though. Lets see where you mounted the camera it looks like a great spot that you picked

I'm waiting for some warmer weather to run mine. I got a lic plate mounted one from Crutchfield.

Posts like this help tremendously. :top:
 

hottacoX

Moderator
Staff member
Joined
Dec 21, 2009
Messages
4,823
Reaction score
3
I also ran wires for my train horn and keyless tonneau cover through that gromet, if you have ever been under the truck it's quite simple really to run the wires!

Great job OP I have an OEM tailgate cam that I will be mounting up once the warm weather hits...
 
Top Bottom