Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Search results

  1. Edgeman

    GearHead899 build thread

    Can you snap a picture to see what you did under the hood? Curious how you routed the air to your engine intake?
  2. Edgeman

    Recommend checking the pins that hold the plastic bed rail caps in place.

    Bed liner? They are located in the bed, just under the bed rail caps.
  3. Edgeman

    Recommend checking the pins that hold the plastic bed rail caps in place.

    Talking about the plastic pins that are inserted through the inside of the bed on both ends. I found two of the push pins laying in my bed, so I picked up four replacements at my local Toyota dealership. Part #90467-07188. When I went to install them, I found the other two pins were loose and...
  4. Edgeman

    Finally got around to using the Cerakote headlight restoration kit.

    I'm happy with the results: My advice: don't wait until your headlights are this bad before using the kit...lol I used the old "WD-40" trick last year for my state inspection, but finally decided to do it correctly this year.
  5. Edgeman

    StopTech BBK upgrade - installed

    I went from this: To this: Comparison of the calipers: Comparison of the rotors:
  6. Edgeman

    Thanks Gadget! I finally installed the BBK

    I went from this: To this:
  7. Edgeman

    brakes

    Gadget, I'm finally in the market for a BBK kit, and your StopTech BBK kit is at the top of my shopping list. One question: it comes with the two SS brake lines for the front, but do you also sell the rear brake line? Would like to knock out all three at the same time. Tried sending a...
  8. Edgeman

    Octane as it pertains to engine performance

    Engine Masters had a naturally aspirated LS-3 on a Dyno at Westech, and decided to test 87 and 91 pump gas from a gas station down the street from them, as well as Sonoco race gas in 110 and 116 octane levels. There was no noticeable difference in power between any of the fuels. E85 did make a...
  9. Edgeman

    Just bled my brakes & clutch, and clutch engagement is just as you push in the pedal

    Just finished bleeding the clutch, along with manipulating the clutch pedal four or five times before closing the bleed screw. That seems to work. My clutch engagement point is back to normal, meaning it moved a couple inches. Hopefully I'll remember to put both (large and small) bottles...
  10. Edgeman

    Just bled my brakes & clutch, and clutch engagement is just as you push in the pedal

    Thanks! I'm going to try one more attempt to bleed the system, since clutch engagement was higher before. I'll hook up the Motive bottle again, crack the bleeder screw, then try pressing down on the clutch four or five times to see if that will blow any remaining air out of the system.
  11. Edgeman

    Just bled my brakes & clutch, and clutch engagement is just as you push in the pedal

    I used my Motive Power Bleeder to flush the brake/clutch on the X Wednesday, but I forgot I needed an extra bottle to do the clutch. When I was flushing the fluid, all four corners went smoothly, but I was just about finished with the clutch when I saw bubbles coming through the "catch" bottle...
  12. Edgeman

    Anyone use the Cerakote Ceramic Headlight Restoration Kit?

    Waiting for a warm enough day to do it. Don't know what's required, but I prefer not standing outside in 30 or 40 degree weather...lol Hopefully we'll get a nice clear day in the 50s soon. Clock is running out...my inspection is due in March, so I need to do it before the inspection.
  13. Edgeman

    Anyone still around?

    Custom work is required for a 4-link too. That also needs research on where to place the bars for the best handling. I've seen Ian do 4-link setups for his off road vehicles, and there's definitely a lot that goes into the design.
  14. Edgeman

    Anyone still around?

    I find myself spending a lot of time on the Tacoma World website. It's pretty active, unfortunately most of the people own 4X4s over there. X-Runners are practically unknown on that website. Saw one post where someone asked why anyone would "lower" their Tacoma...lol But they do have a lot...
  15. Edgeman

    Anyone use the Cerakote Ceramic Headlight Restoration Kit?

    Supposed to be good for the life of the headlights. Headlight - CerakoteCeramics Just ordered a kit, and will post the initial results next week when we have temps in the 50s again. Fingers Crossed!
  16. Edgeman

    New tires

    I bought the "all season" version of the tires, just in case I need to drive during "winter" conditions. Since I have a TSX (which is FWD) for bad weather driving, I may put summer tires on my X the next time.
  17. Edgeman

    New tires

    I went with the Pilot Sport A/S3 in 2019, and I've been happy with them. They were sold by Costco. I've been disappointed with my last two sets of Bridgestones, so I wanted a change. Just checked Costco's website, and they no longer sell the A/S3. They now sell the Pilot Sport 4S and Pilot...
  18. Edgeman

    Stock Radio turns ON and OFF after battery was changed

    I highly recommend you visit Crutchfield and do the swap yourself. You never know what wires an "audio shop" might cut during their install, and with the instructions Crutchfield provides, not to mention their excellent customer service, it is probably much easier than you imagine. Crutchfield...
  19. Edgeman

    "Over-built" ball joints and other suspension components

    Thanks mejbro! I like going OEM, but if I can find a better, much stronger product, I'll go with it! One thing I've read is that Toyota doesn't want to sell just ball joints, but they sell upper and lower control arms with the ball joints and other bushings installed. Now I did swap the LCAs...
  20. Edgeman

    "Over-built" ball joints and other suspension components

    Found this linked on TW: https://www.mevotech.com/brands/ttx/ These may be well known in the 4X4 world, but I did a search for my 2008 X-Runner, and they sell parts for it too. Anyone tried these?

Forum statistics

Threads
53,684
Messages
913,734
Members
7,403
Latest member
joeypeeps22

Latest posts

Online statistics

Members online
0
Guests online
48
Total visitors
48
Totals may include hidden visitors.

Stay Connected

Top Bottom