Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

AC harness issue

Ziggy297

Member
Joined
Mar 1, 2014
Messages
110
Reaction score
17
I recently lost all but 1 speed ( medium) on my AC in my 2010 X. I went online and the problem everyone else has had was the blower resistor but their blower was on high only. I pulled the AC module out and found a charred wire connection ( pics attached). Has anyone else had this issue? I am lucky my dash didn't burn up from the looks of it and the hot wire.
 

Attachments

  • IMG_3219.JPG
    IMG_3219.JPG
    100.2 KB · Views: 241
  • IMG_3220.JPG
    IMG_3220.JPG
    101.2 KB · Views: 258

o0opackersfano0o

Active Member
Joined
Jun 23, 2016
Messages
443
Reaction score
100
ya I have seen one like that. I just got a used connected and resistor and spliced the wired together.
 

Ziggy297

Member
Joined
Mar 1, 2014
Messages
110
Reaction score
17
ya I have seen one like that. I just got a used connected and resistor and spliced the wired together.
I just bought the connector off ebay ( had to get the entire harness) for $120 and bought the new resistor, and climate control panel. The blower speed switch was toasted bad when I took it apart. That copper got pretty damn hot to do the damage it did.
 
Top Bottom