Banks power exhaust

[vinnieb0i]

Is it worth getting or getting a URD exhaust is better? I'm just gettin some ideas for my next purchase.

http://www.autopartswarehouse.com/p...&modelid=321&year=2005&partid=83&brandid=3040

 

[Stevenredx]

Is it worth getting or getting a URD exhaust is better? I'm just gettin some ideas for my next purchase.

http://www.autopartswarehouse.com/p...&modelid=321&year=2005&partid=83&brandid=3040

First time i have ever seen this setup... i say just swap your muffler, and save some $

 

[vinnieb0i]

factory piping is 2.5"?? would 3" have some benefits?

 

[07XR808]

factory piping is 2.5"?? would 3" have some benefits?

3" is a must if you are going to do forced induction. allows more flow

 

[smirniotisice]

I was wondering about this exhaust as well.

 

[X-Rizzo]

It won't fit the X-Runner.

 

[morcheez]

just get a new muffler ...thats what i did and thats what most have done also

 

[Deviant]

Factory is 2.25"

You'll be losing some back pressure if you get the 3" and are still n/a.

 

[fmsk8r]

you want a little back pressue. opening your exhaust too much will often hurt performance unless your engine can actually create and expunge those hot gasses fast enough.

 

[Xacto]

you want a little back pressue. opening your exhaust too much will often hurt performance unless your engine can actually create and expunge those hot gasses fast enough.

the magnaflow catback has 3 inch piping after the muffler. this yielded a great amount of hp on the dyno.

 

[Deviant]

The Banks and URD are straight 3" from the cat. I don't know how much of a difference it'll make when compared to the magnaflow but something to consider I guess

 

[07XR808]

The Banks and URD are straight 3" from the cat. I don't know how much of a difference it'll make when compared to the magnaflow but something to consider I guess

Brian what type of exhaust do you have?

 

[Deviant]

I've only got a Magnaflow muffler cut in, 5x8x24. Maybe be switching it out for something else soon though...

 

[wshsbears]

stock piping is 2.25 from manifolds to muffler, 2.5 from rear of muffler back changing the muffler is the best bet.