Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Yay. Performance clutch installed!

heloboby7

New Member
Joined
Jan 17, 2007
Messages
415
Reaction score
0
I installed my 6 puck unsprung disc today. The whole job took about 3.5 hours.

Its pretty grabby but slips alright if the rpms are above 2k. If not the whole truck shakes a couple times then goes. I like it alot. I can now go full boost(11psi) in 4th, 5th, and 6th again with no slipping.

Coming soon to the public!
 

XDsm

New Member
Joined
Jan 17, 2007
Messages
2,141
Reaction score
0
Who's the clutch made by? Sounds sweet.
 

DOGO X

Active Member
Joined
Jan 18, 2007
Messages
1,797
Reaction score
2
Heloboby, info please on the manufacturer
 

Spyder327

New Member
Joined
Jan 14, 2007
Messages
7,098
Reaction score
1
I installed my 6 puck unsprung disc today. The whole job took about 3.5 hours.

Its pretty grabby but slips alright if the rpms are above 2k. If not the whole truck shakes a couple times then goes. I like it alot. I can now go full boost(11psi) in 4th, 5th, and 6th again with no slipping.

Coming soon to the public!

Hell Ya!! Sign me up for one.
 

CBRBob

Active Member
Joined
Jan 14, 2007
Messages
1,721
Reaction score
0
Who's the clutch made by? Sounds sweet.

It's grabby below 2K, no judder springs and it makes the truck shake as you go? Yea, sounds like something I want to have :thumpdown: If you are racing it, fine. If this is your everyday driver? Stay away, you will hate your truck.
 

DOGO X

Active Member
Joined
Jan 18, 2007
Messages
1,797
Reaction score
2
I will need it for my TT set up! :biggrin:
 

heloboby7

New Member
Joined
Jan 17, 2007
Messages
415
Reaction score
0
My truck has been turbo almost 13k miles.It's my daily driver. This clutch is not unstreetable by any means. Sure, it shakes a little if you aren't paying attention but it feels like a performance clutch. C2C will have details and pricing for everyone soon.
 

07XR808

New Member
Joined
Jan 14, 2007
Messages
1,769
Reaction score
0
6 puck for a daily driver is a little too much for me. a little upgrade to maybe a stage 2 or something would be good enough for me
 

blackx-runner

"White Flash"
Joined
Jan 14, 2007
Messages
7,581
Reaction score
13
6 puck for a daily driver is a little too much for me. a little upgrade to maybe a stage 2 or something would be good enough for me

same here...don't need anything too rediculous just somthing better than stock
 

Jonathan

New Member
Joined
Jan 14, 2007
Messages
2,051
Reaction score
0
guys, this isnt something crazy. even stock right now, at 26k my clutch slips between hard shifts. this clutch is still streeable, bc it used the stock pressure plate! the clutch wont be hard to press in, you just have to modulate the clutch a little better since it will be more sensitive. im stoked about it, im sure the FI guys are too :driver:
 

Stevenredx

New Member
Joined
Jan 14, 2007
Messages
13,448
Reaction score
4
I had a stage 2 clutch on my previous vehicle that used the stock pressure plate and mix between the both of them was great. Very streetable... nice work guys :top:
 
Top Bottom