I'm trying to decide how low to drop the back of my X. I'd prefer not to notch the frame. I've done a lot of research here and found that many of you have issues with frequent bottoming out on 2.5" or larger blocks with no notch, even with smaller bumpstops and QA1s. I've also read that you can remove the ENTIRE bumpstop bracket and put the stops directly on the un-notched frame. Here's the question I could not find a definative anser to: Do any of you have 3" blocks with no notch, WITH THE ENTIRE BUMPSTOP BRACKET REMOVED and smaller stops mounted directly on the frame with QA1s (or similar stiffer shocks)? Any feedback on bottoming out?