Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Search results

  1. M

    Truck turns over but will not start.

    Well it's been two months since I found the issue, and naturally it hasn't acted up since I found the problem. If it acts up again and I can fknd out why I will update what I find out.
  2. M

    Truck turns over but will not start.

    Found out today that the wire at the ecm that comes from the ignition switch did not have power when the switch was turned to the run position. I jumpered power to this wire and it fired right up, however before i could start testing for the reason, the truck stopped acting up so I couldn't...
  3. M

    Truck turns over but will not start.

    I will keep working on it and update if I find anyghing.
  4. M

    Truck turns over but will not start.

    I have tried replacing relays, and it doesn't make any difference. One more thing that I just remembered is that I have had this truck up to 130. Could this mean that the governor has been bypassed, and if so could that have anything to do with the issue?
  5. M

    Truck turns over but will not start.

    I removed the remote start unit, but left the wires. I looked at all of the wiring and I don't see any wires that have come loose.
  6. M

    Truck turns over but will not start.

    I have a 2006 x runner that I bought two years ago. The vehicle was a theft recovery, when I got it the bulbs for the fog lights were missing, the ignition cylinder had been damaged cosmetically, and the plug for the power mirror switch was missing (the wires were all there and the switch was...
  7. M

    Sittin sic drop and stock y-pipe

    what exactly is the drop, how much of a drop, amd what is included?
  8. M

    Power mirror wiring

    I was hoping for an actual picture of the connector because from the diagram I dont know which wire goes where on the switch.
  9. M

    stock headlight housings

    I have a pair of stock headlight housings from a 2006 with 60,000 miles on them. $100.
  10. M

    Stock manifolds

    I have a set of stock manifolds that I pulled off of my truck at 60,000 miles. gone
  11. M

    Power mirror wiring

    I have since decided to solder wires directly to the switch and make the connections myself. If anyone has a good picture of the wires leading into the connector for the power mirror switch that would be appreciated. Thanks.
  12. M

    Tools Explained (funny)

    Laughed so hard I had tears.
  13. M

    Bed extender

    check out a cargo bar from northern tool, greatest thing for the bed of a truck
  14. M

    Truck Bed Amp Rack?

    I put an amp rack in the bed of my last truck. What I did was to build an enclosure for them and then I used a product called Frogzskin for the vent holes. The material is waterproof/breathable so it can breathe, but water wont get into the enclosure. Another option is what I did on my X...
  15. M

    My ongoing Project 1969 Camaro 400 BigBlock

    Its a 69 camaro, to do anything other then getting it back on the road would be a shame.
  16. M

    I have two choices for wheels...

    You could also pull the spare, have it dismounted and do one tire at a time so that you wouldnt be without a truck.
  17. M

    redneck lottery winners truck

    Camping with class, the redneck way
  18. M

    My SWB 2008 X-runner

    Nice truck, good luck with the mods.
  19. M

    It's been a fun ride, but I needed a change

    Nice car, put exhaust on that and it sounds mean.
  20. M

    had a run in with a kenne bell supercharged mustang

    Gotta love when you keep up or beat someone who thinks that they will walk away from you.
Top Bottom