Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

C2C Kit. installed.

drewXrunner

New Member
Joined
Jan 14, 2007
Messages
611
Reaction score
0
Ok . got the C2C lowering kit on. It looks great got it aligned, but for some reason when I FLoor it, The steering pulls to the left. Has anyone had this problem?
 

wshsbears

New Member
Joined
Jan 15, 2007
Messages
2,514
Reaction score
0
its probably u.. the urge to take some serious corners.. ya, go back and get it re-aligned. thats a caster issue. my caster is 5 driver side and 5.5 passenger b/c all the roads here in florida r sloped to let the rain water drain off.. at least thats what the alignment tech told me.
 

07xrunner

Active Member
Joined
Jan 21, 2007
Messages
1,820
Reaction score
0
pics drew ? lol ...what shop did you use cause im lowering mine this weekend:biggrin:
 

project-c2

New Member
Joined
Feb 27, 2007
Messages
1,880
Reaction score
0
The only time I had that was when the rear tires break loose. :biggrin:
 

morcheez

New Member
Joined
Jan 14, 2007
Messages
4,001
Reaction score
0
the pulling might just be the road....those damn tires go wherever the road tells them to
 

Spyder327

New Member
Joined
Jan 14, 2007
Messages
7,098
Reaction score
1
the pulling might just be the road....those damn tires go wherever the road tells them to

That might be the case.

you are holding onto the steering wheel when you gas it though right? lol..
 

BSPX

Member
Joined
May 14, 2007
Messages
583
Reaction score
0
no, its not so much when he floors it, but its when he pushes the clutch in and releases it when he's flooring it. Maybe a camber issue? I believe he is still at -2.5* with the C2C kit
 

BSPX

Member
Joined
May 14, 2007
Messages
583
Reaction score
0
and I checked for trailing (dog legging) and its dead on, blocks in the rear are installed correctly.
 

XRobber

New Member
Joined
Jan 14, 2007
Messages
1,213
Reaction score
0
no, its not so much when he floors it, but its when he pushes the clutch in and releases it when he's flooring it. Maybe a camber issue? I believe he is still at -2.5* with the C2C kit
Camber isn't gonna cause that....
 

XrunDan

New Member
Joined
Jan 14, 2007
Messages
749
Reaction score
0
Hold the wheel slightly to the right.....QUIK FIX!!
 

xrunner5-0

New Member
Joined
May 8, 2007
Messages
1,626
Reaction score
1
Just installed my C2C kit yesterday....Before and After pics :biggrin:
Getting my alignment done 2day.
 

Attachments

  • before_002.JPG
    before_002.JPG
    64.5 KB · Views: 103
  • DSCN1061.JPG
    DSCN1061.JPG
    67.1 KB · Views: 118

Natas

New Member
Joined
Apr 6, 2007
Messages
1,384
Reaction score
0
Nice pics! Makes me want black wheels. :top:
 

xrunner5-0

New Member
Joined
May 8, 2007
Messages
1,626
Reaction score
1
Just ran into my first snagg, The alignment shop will not touch my wheels! These wheel have a stainless insert over the lip and they are afraid of scratching them.
 

i_ski

New Member
Joined
Apr 4, 2007
Messages
1,041
Reaction score
0
if you have the stockers just throw them on for the alignment
 

xrunner5-0

New Member
Joined
May 8, 2007
Messages
1,626
Reaction score
1
I would, but the tires are not on the stock wheels anymore.....but i just found a shop further away that aligns vehicles such as street rods and they told me they will do it today. :rock:
 
Top Bottom