Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

CEL p2241

XMPLRY808

Active Member
Joined
Dec 5, 2014
Messages
405
Reaction score
76
Working on my truck I had to disconnect some electrical connections cause it was in my way. The passenger side spark plug and injector connections. So after working on my truck I drive around for about 1/2 mile and the code pops up. driving my truck after It's a AR sensor that went bad but I didn't even touch it. My friend suggested maybe since I didn't disconnect my battery, it caused the sensor to short out... I don't know...

But I do have gauges and all my gauges looks good. The fuel trim on my ultra gauge and I also have dual afr sensors on each bank and both reading good so I don't know what's the deal but I'll just reset it everytime it comes on I guess.
 

Torspd

Moderator
Staff member
Joined
May 25, 2008
Messages
14,814
Reaction score
54
Start with going back over all of the connections which you messed with originally.
 
Top Bottom