Coupe
Active Member
- Joined
- Dec 31, 2007
- Messages
- 6,871
- Reaction score
- 15
I am testing the waters to see if I can get enough people interested in this to make it.
This would be an aluminum oil pan similar to what I am making now, but with less capacity. Currently the pan I have now will hold 7 1/2 qts with a large filter and 7 1/4 with a small filter. The DJM oil pan would be at 6 ~ 6 1/4 quarts.
I would reduce the depth to make it fit behind the cross member. This would still be a baffled pan. It would come with all hardware/gaskets for installation.
Price would be $1100, shipped to the lower 48 states. I would be looking for a deposit of $250. The balance would be paid when complete. I would expect about 8 weeks to finish the pans, after we have 5 people committed with paid deposits.
These are pics of the 7 1/2 qt oil pan.
I need five (5) people to make this happen.
0. Coupe
This would be an aluminum oil pan similar to what I am making now, but with less capacity. Currently the pan I have now will hold 7 1/2 qts with a large filter and 7 1/4 with a small filter. The DJM oil pan would be at 6 ~ 6 1/4 quarts.
I would reduce the depth to make it fit behind the cross member. This would still be a baffled pan. It would come with all hardware/gaskets for installation.
Price would be $1100, shipped to the lower 48 states. I would be looking for a deposit of $250. The balance would be paid when complete. I would expect about 8 weeks to finish the pans, after we have 5 people committed with paid deposits.
These are pics of the 7 1/2 qt oil pan.
I need five (5) people to make this happen.
0. Coupe