FS: OEM oil cooler

[HertzAudison4Life]

I have a complete OEM oil cooler for sale minus hose clamps. Reason for sale, when i ordered my URD MK3 kit i decided to order an oil cooler at the same time. But once i received the cooler i noticed my Tacoma never came with auxiliary ports for the upper and lower hoses :stupid:. So here i sit with a useless oil cooler thats never been install and needs a new home. What you see in the pic is what you get. Asking $500 shipped. PM if you have any questions.

Items In Picture
-Oil cooler assembly - Part#:15710-31010
-Upper hose - Part#:15778-31010
-lower hose - Part#:15777-31010
-Center bolt w/ washer - Part#:15695-22010

 

[hottacoX]

If you want to use it you can just order a new thermostat/water housing.... It's like $50 I believe....

 

[HertzAudison4Life]

I would but i'm currently using this and i kinda need it for my oil temp and pressure senders... if i wasn't all ready running what i have i would.

 

[hottacoX]

Stack them....

Get the greddy plate and you can stack them.... Slywitty is running that set up and I will be soon !

 

[HertzAudison4Life]

If i can't get rid of it i will, but i was hoping to use the Greddy sandwich plate and piece together an oil cooler setup from selling this unit. How hard is it to change out the water inlet? And $50 new or used?

 

[blackx-runner]

Just to clarify any X-runners wanting this will need to get the new front water manifold with the extra inlet/outlet for the cooler. None of our vehicles had that from the factory. Changing it is fairly simple. A few bolts, pull off the old one and replace with the new one.
Still they are great oil coolers.

 

[Slywhitty]

Yup double stack here! Lol works great!!

Also When I swapped my motor the new one had the ports for oil cooler. So I can't help ya with prices but can say its worth it though.

 

[Coupe]

I have this arrangment also. I stacked mine.

 

[HertzAudison4Life]

Does anyone have or know part numbers for this water inlet that will accept the OEM oil cooler???

 

[butters607]

Little off topic but I made a long write up on a custom oil cooler system and it works great you will get better temps than you ever thought of with the kit I put together than the factory sandwich style.

 

[KETCHUP]

GL on the sale. I am running this OEM cooler on my truck when I rebuilt my last motor. Well worth the buy if your boosted IMO. Always good to cool that oil down!!

 

[GrumpyOldMan]

BUMP FOR A DEAL:

Just need to add the following:
P/N 16323-0P020 T-stat housing (About $100)

Good idea to replace these as well..
P/N 16326-31010 thermostat o-ring
P/N 96761-35031 upper tube oring
P/N 16325-31010 lower oring


Dave

 

[Gadget]

If you want I can order the parts through my local dealer.

The counter guy is a member here and gives me pretty good deals.

G

 

[GrumpyOldMan]

If you want I can order the parts through my local dealer.

The counter guy is a member here and gives me pretty good deals.

G

Wished I'd have known that G....

I ordered it all from an online place out of Ohio....hope the shipping doesn't take TOO long!

 

[picaCulo]

Dammit sure wish i had the money ..................BUMP good luck with sale!

 

[X-roller]

check your pm's sir. I can't believe I didn't see this.