Headlight Wire in Kick panel

[NHXRUNNER]

I'm installing gauges and I need to know which wire to tap my dimmers into. The instructions call for the headlight wire. It's not the dimmer wire. The gauges power up full brightness and dim when 12v is applied to the white wire. I want that to be with the headlights not the parking lights. I run my headlight halos off the parking lights and run those often. So I want full brightness during the day when running the parking lights. Any help would be greatly appreciated. :top:

 

[fishsticks]

I believe I got headlight switched from a green wire in the kick panel. I'll have to look.

 

[NHXRUNNER]

That would be awesome. Let me know. If you could snap a pic too that would be even better. :top:

 

[05TACOMAXRUNNER]

Headlights - White wire in connector IA1 in left kick panel.

 

[NHXRUNNER]

Which connector is that. I can't find a diagram that points out IA1. Can you take a picture?

 

[05TACOMAXRUNNER]

I will open up my kick panel and get you a real picture. Its a grey colored connector in the kick panel and the white headlight wire is pin 29.

 

[NHXRUNNER]

I will open up my kick panel and get you a real picture. Its a grey colored connector in the kick panel and the white headlight wire is pin 29.

This will probably be enough but a photo is always best. Thanks again! :top: