Alright I'm having a problem with the HID's in my truck now first off I'm no stranger to HID conversions I have the headlight and fogs done in the truck, my car, my wife's car and my bike. I know how to hook em up with and without the relay harnesses and I've been trying to trouble shoot this for some time now but just cant seem to figure it out. So here we go.
Currently I have the DDM tuning 35W kit installed in the headlights and fogs with no issues what so ever they fire up first time every time. However when I try to switch the headlights to the DDM 55W kit the passenger side will not work it flashes for a half second and that's it. I know its not the bulb or ballast as I have switched both and the problem remains on the passenger side I have also tried 3 different wire harnesses to no effect. I have also switched the fogs back to stock halogen as well as disconnected them completely with no effect on the passenger headlight(still does not work).
Next problem I can put a new fresh set of bulbs in the 35W kit and like I said it fires up first try every try. After switching to the 55W the passenger does not work as mentioned above. Then when switching back to the 35W the passenger bulb starts to have problems like not turning on first try it takes like 2-3 try's but if I put a new fresh bulb it works no problem. It ONLY starts to act up after I try the 55W then switch back to the 35W.
To take it one step further I have tried the same 35W and 55W setup in my 06 corolla as well and I run into the exact same issue with just the passenger side not working with the 55W but it works flawlessly with the 35W kit.
A second step I have tried it in my wife's 08 Yaris and both the 55w and 35W work flawlessly.
I can't figure out what the difference is between my wife's car and my two, why does it work in hers and not mine?
I have had this problem with the hi/low h4 HID's and the current D2S bulbs in the projector conversion. So I also know that its no just related to the H4 bulbs. And the corolla uses 9006's so again I know its not just the h4's.
I have read on the forums of guys running the DDM 55W kit in the headlights and even the fogs at the same time with no problems so what am I missing here?
ANY help or ideas would be greatly appreciated.
Currently I have the DDM tuning 35W kit installed in the headlights and fogs with no issues what so ever they fire up first time every time. However when I try to switch the headlights to the DDM 55W kit the passenger side will not work it flashes for a half second and that's it. I know its not the bulb or ballast as I have switched both and the problem remains on the passenger side I have also tried 3 different wire harnesses to no effect. I have also switched the fogs back to stock halogen as well as disconnected them completely with no effect on the passenger headlight(still does not work).
Next problem I can put a new fresh set of bulbs in the 35W kit and like I said it fires up first try every try. After switching to the 55W the passenger does not work as mentioned above. Then when switching back to the 35W the passenger bulb starts to have problems like not turning on first try it takes like 2-3 try's but if I put a new fresh bulb it works no problem. It ONLY starts to act up after I try the 55W then switch back to the 35W.
To take it one step further I have tried the same 35W and 55W setup in my 06 corolla as well and I run into the exact same issue with just the passenger side not working with the 55W but it works flawlessly with the 35W kit.
A second step I have tried it in my wife's 08 Yaris and both the 55w and 35W work flawlessly.
I can't figure out what the difference is between my wife's car and my two, why does it work in hers and not mine?
I have had this problem with the hi/low h4 HID's and the current D2S bulbs in the projector conversion. So I also know that its no just related to the H4 bulbs. And the corolla uses 9006's so again I know its not just the h4's.
I have read on the forums of guys running the DDM 55W kit in the headlights and even the fogs at the same time with no problems so what am I missing here?
ANY help or ideas would be greatly appreciated.