rexrunner
Active Member
- Joined
- Jan 13, 2007
- Messages
- 2,578
- Reaction score
- 5
Ok so I sold my alpine w200 to a friend and decided I wantee to do a tablet...
It's all powering my jl 300/4 with xr comps up front and a w3 stealth box
Cut out everything
Cut new sides from 1/8 abs plastic
Fits nicely, super glue to hold in place temp..
Backplate tacked in
Electromag charger..got it on clearance
Mounted flush with backplate, epoxy drying
Nice and flush again
How it sits ... Before faceplate
Lower plate being installed...
HP touchpad 32 g 230. Rooted it with cm9
HP touchstone charger 39.99 at compusa
Random plastics and glue and epoxy 30 ish
Still need my Bluetooth receiver 45
Equalizer setup 60 for my setup
The eq I'm getting will give me a 7v preout and bass control and boost for the loss of bass over a a2dp setup...
It's all powering my jl 300/4 with xr comps up front and a w3 stealth box
Cut out everything
Cut new sides from 1/8 abs plastic
Fits nicely, super glue to hold in place temp..
Backplate tacked in
Electromag charger..got it on clearance
Mounted flush with backplate, epoxy drying
Nice and flush again
How it sits ... Before faceplate
Lower plate being installed...
HP touchpad 32 g 230. Rooted it with cm9
HP touchstone charger 39.99 at compusa
Random plastics and glue and epoxy 30 ish
Still need my Bluetooth receiver 45
Equalizer setup 60 for my setup
The eq I'm getting will give me a 7v preout and bass control and boost for the loss of bass over a a2dp setup...