Just finished Sittin Sic drop, dash color change and BTLM here's pics

[06 xrunner]

That sucks man. Yeah mine are spec d haven't had any problems but i did research beforehand and some are made in China and some Taiwan apparently the Taiwan ones are better quality. Any chance you can get return yours? If not maybe you can open them and let dry then reseal them

 

[Workman3886]

i got the same headlights. Are yours spec d cuz they look the same. Except both of mine fog up, im so annoyed man.

You are going to have to reseal it, then put a small bead of silicone around the outside of the light, after I did that to mine I didn't have anymore issues with water vapor.

I do suggest when you heat up the lights in the over to break them apart, scrape all the old sealant off, the first time I didn't and they pretty much fogged back up instantly.

 

[12trdtacoma]

Was it very hard to switch the leds in the gauges i want mine blue

 

[06 xrunner]

Now it's fairly simple as long as you don't mind soldering. Here's the write up i followed

http://www.xr-underground.com/vb3/showthread.php?t=941

and these are the LEDs I ordered

http://www.oznium.com/plcc-2

I hadn't soldered in like 15 years since high school and it was a piece of cake..just make sure you don't use one of the big gun soldering irons use like the pencil looking ones and make sure you order enough leds for what you all wanna change
dash lights, blinkers, odometer, or any other of the lights there

 

[Upnover]

Now it's fairly simple as long as you don't mind soldering. Here's the write up i followed

http://www.xr-underground.com/vb3/showthread.php?t=941

and these are the LEDs I ordered

http://www.oznium.com/plcc-2

I hadn't soldered in like 15 years since high school and it was a piece of cake..just make sure you don't use one of the big gun soldering irons use like the pencil looking ones and make sure you order enough leds for what you all wanna change
dash lights, blinkers, odometer, or any other of the lights there

All looks great,thanks for the dash light link...

 

[giox]

how did you do it

 

[12trdtacoma]

Does anyone have a pic of the 2012 dash with color change on the gauges

 

[06 xrunner]

how did you do it

How did I do what? There's write ups for it all under the how-to section

 

[nolove]

that whole set up is on point. real clean

 

[giox]

ok thank you im new to this thats why

 

[Sasquatch95]

sick! :top: