Thanks man. To answer your question, yes all the wiring is there. The sensor mounts to the support behind the grill opening under the hood latch. You just have to fish the connector out of the wire loom and connect it and snap the sensor to the support. In the cab, remove your old unit and the wire connection is there plugged into a dummy connection. It's probably less than an hours worth of work. The only thing you have to look out for on these is the year of your truck. I believe 09+ are not wired the same so the display just shows no values. But I had this in my 07 and it worked great. There is a sticky for this mod here on the web site.
Perfect. I'm gonna think about it. Gotta figure out the priorities for the truck haha. Thanks for the info on the comp.
Dale C