akakrill
Member
- Joined
- Mar 26, 2007
- Messages
- 944
- Reaction score
- 2
G, I'm stripping my 4wd Tacoma I retained the 4.10 rearend 3rd member, but before I have it hauled away do I need the housing and axels or just the 3rd member and gears to work inside the Xrunner rear end in preparation for the T56?
Also the 1GR from the wreck is a 2005 and has a different oil pan and lower portion of engine block, does a 4wd 1GR fit in the Xrunner without modification to the cross member?
Does the T56 and or stock manual transmission accept the fidanzia flywheel and bolt to the 4wd 1GR?
What a can of worms this is to deal with!
Thanks for your help -Bill
Also the 1GR from the wreck is a 2005 and has a different oil pan and lower portion of engine block, does a 4wd 1GR fit in the Xrunner without modification to the cross member?
Does the T56 and or stock manual transmission accept the fidanzia flywheel and bolt to the 4wd 1GR?
What a can of worms this is to deal with!
Thanks for your help -Bill