Put in some wrench time this weekend. Had all of the puzzle pieces to install the Ohlins.
The uninstall.
This is where it gets graphic.
This is after almost 4 years of useage. Three+ with what worked for the bottom mount. This particular picture is after my most recent bushing/sleeve update, but it was already quite damaged from what came with the QA1 kit. As nothing was a precise fit with the OEM LCA bolt.
This is what it looked like before and after I changed the bottom bushing setup.
And here it is with the recent sleeve that perfectly fit the lower bolt. Not an easy part to find, nor cheap!
The damage was already done to the shock though, but this still worked well for its short stint. Had the shock body not already been damaged, then these would have worked very well for likely a long time. The bushing material could been a harder durameter though.
Cleaned the 2.5" springs and swapped them over.
More to follow soon.