P/N: PTR29-35070 - MAIN SUPERCHARGER KIT
P/N: PTR29-35072 - TACOMA FIT KIT
Item Qty Req’d Description
1 1 Main Supercharger Assembly with Hardware Bag “B” attached to the coolant nipples at the rear of the intercooler lid.
2 1 TRD Air Filter (not illustrated)
3 1 Hardware Bag “C”
4 1 Hardware Bag “D”
5 1 Hardware Bag “E”
6 1 Hardware Bag “F”
7 1 Hardware Bag “G”
8 1 Hardware Bag “H”
9 1 Hardware Bag “I”
10 1 Hardware Bag “J”
11 1 Hardware Bag “K”
12 1 Hardware Bag “L” (White Envelope)
1 1 Heat Exchanger - Low Temperature Radiator (LTR)
2 1 Hood Support Bracket
3 1 Hardware Bag “A”
Hardware Bag “A” Contents
Item Qty Req’d Description
1 1 Installation Instruction Manual
2 1 Reservoir Bracket
3 2 Rubber Grommet
4 2 M8X20mm Hex Flange Head Bolt
5 1 Spacer, .50” Dia X .75” Long
6 1 M6X50mm Hex Flange Head Bolt
7 1 M6X20mm Dia Washer
8 2 Spacer, .75” Dia X .75” Long
9 2 M8X30mm Hex Flange Head Bolt
10 1 10 Amp Mini Fuse
11 1 Ring Terminal, 12-10 GA
12 12” 5/16” EVAP Hose
Hardware Bag “B” Contents
Item # Qty Req’d Description
1 6 M8 X 35 mm Reduced Shank Hex Head Bolts
Hardware Bag “C” Contents
Item # Qty Req’d Description
1 1 Tensioner Bracket Assembly
2 1 5 Rib Belt
3 1 Smooth Idler Pulley
4 1 5 Rib Idler Pulley
5 1 Tensioner Strut Bracket
6 2 M10 Double Ended Stud
7 2 M10 Hex Flange Nut
8 1 M8X16mm Hex Flange Head Bolt
9 2 Short Spacers
10 1 Idler Spacer with Groove
11 1 Idler Spacer without Groove
Hardware Bag “D” Contents
Item Qty Req’d Description
1 1 Upper Idler Bracket Assembly
2 3 M8X20mm Hex Flange Head Bolt
Hardware Bag “E” Contents
Item Qty Req’d Description
1 1 Crank Pulley
2 1 M16X70mm Hex Head bolt
3 1 M16X48mm Dia Washer
Hardware Bag “F” Contents
Item Qty Req’d Description
1 1 Supercharger Support Bracket
2 1 Air Box Bracket
3 1 VSV Bracket
4 2 M6 Hex Flange Nut
5 1 M6 Washer
6 1 M6X16mm Hex Flange Head Bolt
Hardware Bag “G” Contents
Item Qty Req’d Description
1 1 Thermostat Spacer
2 1 Water Pipe Spacer
3 1 O-ring – Large
4 1 O-Ring Small
5 2 Spacer
6 5 M6X55mm Hex Flange Head Bolt
Hardware Bag “H” Contents
Item Qty Req’d Description
1 1 Wire/Conn Assembly
2 2 Adel Clamp, #36
3 8 Wide Band Spring Clamp
4 10 Tie Wrap, 7.5”
5 1 Hose Mender Fitting, ¾”
6 2 Hose Clamp, #10
7 1 Adel Clamp, #16-2
8 1 M6X20mm Hex Flange Head Bolt
9 1 M6 Hex Flange Nut
10 2 M6X16mm Hex Flange Head Bolt
11 1 15 Amp Fuse
12 1 Fuse Tap-In
13 1 Female Terminal, 16-14 Ga
14 4 M6X12 Hex Flange Head Bolt
Hardware Bag “I” Contents
Item Qty Req’d Description
1 1 Intercooler Pump
2 1 Coolant Reservoir with Cap
Hardware Bag “J” Contents
Item Qty Req’d Description
1 96” 1” Wire Loom
2 1 ¾” x 4” x 36” Coolant Hose
3 1 ¾” x 4” x 60” Coolant Hose
4 96” ¾” Coolant Hose
5 1 ¾” Formed Coolant Hose, LTR to Pump Outlet
Hardware Bag “K” Contents
Item Qty Req’d Description
1 1 Lower Radiator Coolant Hose (loose in main box)
2 6 Spark Plugs
3 6 Fuel Injectors
Hardware Bag “L” Contents
Item Qty Req’d Description
1 2 Sticker, TRD Supercharged
2 2 Sticker, TRD Development
3 2 Sticker, Premium Fuel Warning
4 2 Sticker, TRD Red TRD Logo
5 1 Warranty certificate, TRD
6 1 Warranty Registration Card
7 1 Mirror Hanger, S/C Noise
8 1 Label, Vacuum and Belt Routing
9 1 Label, CARB D-425-20