UCON for 09+

[XTINCT_yota]

I have the connectors to make one. Guess it is time to make one.

Sounds good to me lol

 

[Moose1988]

I have one jumper harness made. It cost me a ton.

I am holding it for someone that buys a ECU device and the harness together from URD. The cost of the harness is $500+

G

wait.. this is for the 09+ Ucon?

 

[Gadget]

No, the UCON does not use a harness.

 

[Moose1988]

ok, that's what I thought. I got confused for second. Still finishing up the 09+ connectors though?

 

[Gadget]

No, have all the connectors now.

 

[XTINCT_yota]

So... How's everything going gadget?

No, have all the connectors now.

 

[XTINCT_yota]

I now have all the connectors I need to do a production run.

This has been a very expensive and very painful process for me. If I was smart I would have pulled the plug long ago.

I have a UCON in the 2010 4Runner using our universal version and we are stepping through the process of sensor mapping and calibration. The actual tuning pretty much takes care of its self once everything is mapped out. When the plug and play version is ready everything should just work perfectly.

The new circuit board for the new connectors is being designed and should be done this weekend and it should be released for production next week. Then it is just waiting again.

So, things are moving forward now. I hope around the 1st of the year we can start shipping UCONs and URD supercharger kits for the 2009-2011 V6 trucks. Then I will get cracking on the 2012 and later ones.

G

It has been 6 months since you have stated this Gadget. What's going on?