Kendall124
New Member
- Joined
- Feb 10, 2016
- Messages
- 28
- Reaction score
- 6
Installed this morning. Too easy! Love the stance, love a kit that works perfectly the first time. No mods.
Have a look.
Have a look.
By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!I was in Seattle last month and ya those streets are rough. I have the full kit with sways. It's really flat in the corners. I will say the sways complete it and the rear qa1's are the only way to go.She's driving pretty well. Going to take her in for an alignment this week. Front end feels the same. The tail hits a little hard on bigger bumps/potholes/manholes. Seattle streets are a little rough. It's been wet here so I haven't thrown her around or pushed her through corners. Her tail comes out really easy in the wet. I should have replaced the shocks while under there. Pretty sure those are the original Bilsteins. Really could use a full set of sways.
It does however look wicked cool.
XII Perfomance Street Drop consists of drop coils and blocks for the rear. He's likely riding on his stockers. Email sentI'm looking for stock leaf springs for my 2005 X-Runner. Do you now have some to sell? If so, I'm at bto4748@aol.com or 678-570-3986. Brian
Hey I went with this kit as well after coming across yours and other post of different drop kits. It's awesome I love it and was pretty easy to install... I've come across one problem though and was wondering if it has happened to you guys... my rear U bolt bolts is coming loose and starts to squeak. I've noticed the first time it was so lose was only around 20lbs torque lol.... I then torque it to 80lbs I saw on some forums 90lbs was max and some other forums 150lbs is maxed. I'm not sure about our truck. And it has come loose again.. does this happen to you guys and do u know exactly what torque lbs is required for these u bolt bolts. Thanks