TommyXrunner
Active Member
- Joined
- May 22, 2012
- Messages
- 1,859
- Reaction score
- 0
BTLM, power stop brake kit, supercharger pulley, and fuel pump upgrade..... in no specific order
By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!Your just getting to the 2.8 pulley now? you had it sitting for quite a while lol
haha ya i know.... fuel pump was a breeze to do. totally wrecked the stock pulley getting it off and the new pulley went on so easy we didn't even need the press fit tool. we heated it up quite a bit and i just slid it on by hand. accidentally pushed it on a tad too far (about 2mm past being flush) but seems to be fine. everythings running great but probably should get a wideband and do some tuning. make sure the afr is safe
Awesome, glad it went well! You must have had that pulley HOT to slide on by hand haha
Good to know that a second hand pulley is still fine defenitly would check your AFR's after that install
Right on man you finally got them done. You been talking bout them for awhile. So what's next on the list?
Too bad we didnt meet up again before I sold the X we could have swapped taillights