kwigs160966
Member
- Joined
- Oct 5, 2011
- Messages
- 631
- Reaction score
- 3
By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!You can pick up a pair of wheels for around 100$ and the slicks around 500$ I only made 5 passes on my slicks before I blew the motor aga N but they make a huge difference. They will be more consistent and easier to launch with. You can see in the one video I just melted my tires off
Will look into it during summer. Do I need 4 slicks or 2?
You only need slicks on the driving axle. You don't need them for a stockish truck.
That was wheelspin.
Explain how it blew the motor?
The rods put some vent holes into the block.
How do you prevent that? I don't have an overdoes of power goin into my motor
Your engine is stock so don't worry about it. Keep up on your maintenance and don't constantly abuse it and you will be fine. Eventually parts wear down and you will have a failure at some point but it will not be as quickly as running a ton of power on stock internals.