Edgeman
Active Member
- Joined
- May 17, 2008
- Messages
- 1,029
- Reaction score
- 27
Have mirror, will travel.
Searched the FAQ section of the board but didn't see a Gentex mirror install.
Most of the installation (like routing the wires through the overhead & down the A-pillar) is fairly straight forward, but wondered what were the best circuits (identified wires by color) to tap into...and where. I don't have a wiring diagram for our trucks, so it will be hit & miss as I go through the wires with a voltmeter looking for possible candidates (constant power/switched).
Would prefer to install it on a circuit that's either not essential (cigarette lighter) or will cause minimal impact if the fuse blows. Heck, would prefer to have a dedicated circuit...any tips on the easiest way to set that up?
TIA!
:hmmmm2:
Searched the FAQ section of the board but didn't see a Gentex mirror install.
Most of the installation (like routing the wires through the overhead & down the A-pillar) is fairly straight forward, but wondered what were the best circuits (identified wires by color) to tap into...and where. I don't have a wiring diagram for our trucks, so it will be hit & miss as I go through the wires with a voltmeter looking for possible candidates (constant power/switched).
Would prefer to install it on a circuit that's either not essential (cigarette lighter) or will cause minimal impact if the fuse blows. Heck, would prefer to have a dedicated circuit...any tips on the easiest way to set that up?
TIA!
:hmmmm2: