X-roller
Active Member
- Joined
- Sep 6, 2008
- Messages
- 5,448
- Reaction score
- 2
Ok so as many of you have slowly started to find out I have been building my truck pretty much in the background and not a lot of people know much about it but a few people. Well it's time to bring it to everyone's attention and as promised as a thank you for supporting me while I was down. This build is for the ones that helped me and donated! I love you guys whether you love me or hate me lets keep this clean just for the sake of a build thread!
Mods:
STS Turbo System
AEM EMS Standalone Unit - The system will include a modified custom AEM EMS, PNP Harness, 3 BAR MAP sensor.
Internals - Forged Rods, JE Pistons (stock bore and compression), Stronger Valve Springs, Port and Polished Heads, Custom Head Gasket from APR to handle about 25-30 PSI of boost, ARP Head Studs, Sleeved Block from Dan Benson Sleeving (Darton Sleeves Open Deck) and that's about it for now.
TTC Catch Can
Aeromotive Stealth 340 lph Fuel Pump with an inline wally 255 (possible surge tank) and ID 1000s
:top:
The Edited Current Version - Pic heavy - Updated 6/11/2013
First week I had the X-runner - Bone Stock 42k on the odo Oct 2008
First "Mod" Painted wheels black
And as it progressed it grew on me...
Thank you XII Performance! Performance drop. 1.75" lowering springs 2" monoleaf drop
I had to get new wheels with blacked out headlights since I did the drop....
And for those that noticed the back windshield sticker... I joined the darkside.... URD MKI
Illest Stance made a short article on my truck. :top:
Engine BLOWN! No pics of this event. It all started with a sharp turn and over a quart low on oil.... :thumbdown:
So I went a different route!
STS Turbo Kit!!
and since I was aiming to go faster... I wanted to make sure I could stop this brick...
TRD Big Brake Kit
TTC Forged Rods
Gotta make sure I have fuel!!
The first plug and play AEM EMS
JE Forged Pistons 10:1
TTC Stiffer Valve Springs
Dual UEGO Wideband Sensors! :rockon: Tune each bank properly.
Plug and Play Harness for AEM EMS Dezod Motorsports is the best! :adore:
Cometic Head Gaskets and ARP Head Studs!
Forged Engine Ready to go!
URD Upgraded Exhaust Gaskets!
Pressure Plate Failed - Competition Clutch Stage 4
Competition Clutch did get a hold of me and they did help me out!
Cool group of guys. Brand New Stage 4
Truck as it sat with the built Engine. New Wheels and Bed cover!
Custom TRD Gauge Cluster with 6200 RPM Redline! Thank you Blackcatcustoms?
STS Turbo Kit goes on.
and the list continues... Unfortunately I can not add any more pics to the post...so now you must find them in this thread... Thank you for checking out my build thread... Enjoy!
Mods:
STS Turbo System
AEM EMS Standalone Unit - The system will include a modified custom AEM EMS, PNP Harness, 3 BAR MAP sensor.
Internals - Forged Rods, JE Pistons (stock bore and compression), Stronger Valve Springs, Port and Polished Heads, Custom Head Gasket from APR to handle about 25-30 PSI of boost, ARP Head Studs, Sleeved Block from Dan Benson Sleeving (Darton Sleeves Open Deck) and that's about it for now.
TTC Catch Can
Aeromotive Stealth 340 lph Fuel Pump with an inline wally 255 (possible surge tank) and ID 1000s
:top:
The Edited Current Version - Pic heavy - Updated 6/11/2013
First week I had the X-runner - Bone Stock 42k on the odo Oct 2008
First "Mod" Painted wheels black
And as it progressed it grew on me...
Thank you XII Performance! Performance drop. 1.75" lowering springs 2" monoleaf drop
I had to get new wheels with blacked out headlights since I did the drop....
And for those that noticed the back windshield sticker... I joined the darkside.... URD MKI
Illest Stance made a short article on my truck. :top:
Engine BLOWN! No pics of this event. It all started with a sharp turn and over a quart low on oil.... :thumbdown:
So I went a different route!
STS Turbo Kit!!
and since I was aiming to go faster... I wanted to make sure I could stop this brick...
TRD Big Brake Kit
TTC Forged Rods
Gotta make sure I have fuel!!
The first plug and play AEM EMS
JE Forged Pistons 10:1
TTC Stiffer Valve Springs
Dual UEGO Wideband Sensors! :rockon: Tune each bank properly.
Plug and Play Harness for AEM EMS Dezod Motorsports is the best! :adore:
Cometic Head Gaskets and ARP Head Studs!
Forged Engine Ready to go!
URD Upgraded Exhaust Gaskets!
Pressure Plate Failed - Competition Clutch Stage 4
Competition Clutch did get a hold of me and they did help me out!
Cool group of guys. Brand New Stage 4
Truck as it sat with the built Engine. New Wheels and Bed cover!
Custom TRD Gauge Cluster with 6200 RPM Redline! Thank you Blackcatcustoms?
STS Turbo Kit goes on.
and the list continues... Unfortunately I can not add any more pics to the post...so now you must find them in this thread... Thank you for checking out my build thread... Enjoy!
Last edited: