- Joined
- May 25, 2008
- Messages
- 14,814
- Reaction score
- 54
ARP Head stud part number for the studs from LC Engineering.
This is the part # for the head studs. ATP 5.950-2LUB, from LCE, if any one needs to find this part # for whatever the reason. :top:
The bottom of the studs, that go into the block are M11x1.5 pitch. Torque to 75 ft/lbs with ARP's Molylube.
Here is the buying link.
http://www.dezod.com/pd_arp_head_stud_kit-1gr.cfm
http://www.lceperformance.com/Pro-Head-Stud-Set-1GR-4-0L-V6-p/1024062.htm
Here are two more part numbers.
ATP6.100-2LUB
These are a little stronger than the ones sold by LCE, according to ARP and LCE. They are ~$23 each, not including nuts and washers.
ATP 7.230-10GB
ARP states that those were designed for an aluminum block, and are rated to hold to 80 psi on the block before stretching.
These are Custom Age 625+. They are much stronger than the ARP 2000 series and L19 series studs. Much more resistant to environmental corrosion as well, unlike the L19's.
They will have to be trimmed a little to fit. Good thing about machine shops. :top:
This is the part # for the head studs. ATP 5.950-2LUB, from LCE, if any one needs to find this part # for whatever the reason. :top:
The bottom of the studs, that go into the block are M11x1.5 pitch. Torque to 75 ft/lbs with ARP's Molylube.
Here is the buying link.
http://www.dezod.com/pd_arp_head_stud_kit-1gr.cfm
http://www.lceperformance.com/Pro-Head-Stud-Set-1GR-4-0L-V6-p/1024062.htm
Here are two more part numbers.
ATP6.100-2LUB
These are a little stronger than the ones sold by LCE, according to ARP and LCE. They are ~$23 each, not including nuts and washers.
ATP 7.230-10GB
ARP states that those were designed for an aluminum block, and are rated to hold to 80 psi on the block before stretching.
These are Custom Age 625+. They are much stronger than the ARP 2000 series and L19 series studs. Much more resistant to environmental corrosion as well, unlike the L19's.
They will have to be trimmed a little to fit. Good thing about machine shops. :top:
Last edited: