ryanschmidt
Member
- Joined
- Feb 24, 2016
- Messages
- 84
- Reaction score
- 0
I bought a universal catch can from VMS and I'm just wondering if y'all just have it connected to the PCV or the vent on bank 1 too? My reason for asking is hose on bank 1 was saturated in oil and I'm assuming that's where all the oil coating the inside of my s/c came from. Should I run a split to both sides to catch can or just from the PCV?
Also, where are y'all mounting catch cans at? I thought I could bolt it up to the s/c coolant reservoir bracket but that doesn't work. On the passenger side, above the skid ecu, directly across from where our coolant reservoirs are bolted up are two 10mm holes. Thought about putting it there
2006 X-Runner
Also, where are y'all mounting catch cans at? I thought I could bolt it up to the s/c coolant reservoir bracket but that doesn't work. On the passenger side, above the skid ecu, directly across from where our coolant reservoirs are bolted up are two 10mm holes. Thought about putting it there
2006 X-Runner