Snoopy_TXR
New Member
- Joined
- Jul 18, 2008
- Messages
- 126
- Reaction score
- 1
Finally got the DJM 3/3 drop done. In the front I used the DJM upper and lower control arms and bought the complete set of ball joints for each arm from ebay for about $85. My buddy pressed in the ball joints in for the control arms with his haudralic press so that part went well. For the rears, I only installed the 3" blocks and U bolts, NO FRAME CUTTING. Last of all I want to thank all the guys who responded to my thread regarding my install questions. Thanks guys!
Here is a picture of stock height:
This is the DJM 3/3 drop height:
Here is a picture of stock height:
This is the DJM 3/3 drop height:
Last edited: