Dallas
Active Member
- Joined
- Jun 8, 2007
- Messages
- 1,098
- Reaction score
- 4
rear disk update, new pics added
Ok guys, im getting close to finishing my rear disk project. just gotta do the Ebrake cables. I swapped out the wilwood calipers for these outlaw units, billet CNC staggered piston sizes. ordered a matching set for the front BBK except they have larger pistons. what do ya think so far
a couple of things: I had to rotate the axle bearing 180deg so the wheel sensor is now at the front, the backing plates are 2 pc so the axle bearing dosent need to be pressed off.
Ok guys, im getting close to finishing my rear disk project. just gotta do the Ebrake cables. I swapped out the wilwood calipers for these outlaw units, billet CNC staggered piston sizes. ordered a matching set for the front BBK except they have larger pistons. what do ya think so far
a couple of things: I had to rotate the axle bearing 180deg so the wheel sensor is now at the front, the backing plates are 2 pc so the axle bearing dosent need to be pressed off.
Attachments
Last edited: