304 Rwhp 315 Rwtq

[ntinhri]

the damn dealer could not finish mine today.. guess Ive wait 3 years whats one more day?I get a free oil change outta the deal though

 

[CxrOLItrdN]

I really really really want this thing.:motz::vroam:

fvck, just do it already :biggrin:

 

[4VsX]

Ahh just put it on the line of credit! Problem solved! :top:

 

[Alexrunner]

Here is a thread that has the install sheet. Look it over and see what you think. :top:

Thanks! Where's it at?:dontknow:

 

[RossK35]

Thanks! Where's it at?:dontknow:

Here it is http://www.xr-underground.com/vb3/showthread.php?t=5988

 

[Alexrunner]

ok, those instructions look confusing already!

 

[RossK35]

ok, those instructions look confusing already!

Yea, they look overwhelming at first but, it's not that hard to install.

 

[Alexrunner]

would i need anything that isnt included in the box besides tools?

 

[utixrunner]

would i need anything that isnt included in the box besides tools?

You have to go to toyota and get the reflash

 

[trd_sport]

Just read the instructions...looks pretty straight forward. Hardest part seems to be the crank pulley.

 

[XrunnIT]

Thanks! Where's it at?:dontknow:

Here it is http://www.xr-underground.com/vb3/showthread.php?t=5988

good catch man, I completely forgot to put in the link :hmmmm2:

 

[Scratchy]

so I gotta ask. When do we get to see a dyno with an 8psi pulley???

Hey Jon, have you checked the Specs for this charger on the Eaton site?
What RPM is it turning now & what is the maximum safe working RPM?
I'd hate to see this thing blow up and spew chunks of metal into the intakes.

 

[Nicodemus454]

oh ya, you'll be in the 13's for sure. you get that 60' to a 1.9-2.1, you'll be running 13.5-13.9. Very nice, what is your elevation? what was the track temp?

ok im at home but i dont have a scanner here... and i tried taking a picture of the slip but it comes out all blurry...

My 60 ft is 2.314
my trap MPH is 95.826

I think a 1.9 is very feasible because all of my starts i was dumping the clutch around 1300 rpm... any more then that and i would spin out... even at 1300 i'd cherp them a bit... then i'd have to ease the throttle through 1st because if i just matt it a LITTLE ill spin out

 

[Alexrunner]

Just read the instructions...looks pretty straight forward. Hardest part seems to be the crank pulley.

Has anyone had problems with the electrical portion?? Just wanna make sure I am prepared. Dont wanna screw anything up!

 

[Nicodemus454]

http://customtacos.com/vb3/showthread.php?t=101687

This guy only ran a 1/8 mile but on the 60 ft he had me beat by almost 3/10ths !! thats easily a 14 flat in a 1/4!!

 

[XrunnIT]

http://customtacos.com/vb3/showthread.php?t=101687

This guy only ran a 1/8 mile but on the 60 ft he had me beat by almost 3/10ths !! thats easily a 14 flat in a 1/4!!

rule of thumb is for every .1 second you shave off of you 60' is .2 seconds off your 1/4 ET. so .3 seconds faster in the 60' would be .6 seconds quicker in the 1/4. You ran a 14.3, he would have ran ~13.7.

 

[Nicodemus454]

rule of thumb is for every .1 second you shave off of you 60' is .2 seconds off your 1/4 ET. so .3 seconds faster in the 60' would be .6 seconds quicker in the 1/4. You ran a 14.3, he would have ran ~13.7.

jesus tap dancing christ he didnt even have slicks!!! :argh: :argh: :adore: :adore: :rock: :rock::adore::adore::adore::adore::adore::rock::rock::rock:

Even a 13.9 would be killer

Anybody starting to think twice about the TRD kit yet?

 

[mikecheat04]

Even a 13.9 would be killer

Anybody starting to think twice about the TRD kit yet?

I'm thinking about it all the damn time! Give me a little time and a lot of money. Gratz to the 13 second XRs:top:

 

[Nicodemus454]

Jon you need to hurry up and get some goodies for this kit so we can watch someone hit 12's with slicks, meth, and more boost ect. :biggrin:

 

[XrunnIT]

12's are gonna be tough. gonna need more boost, some internals for more boost. and maybe some nitrous.