****caution to all djm****

[Who Dat Popcorn]

My driver side lower control arm has started to crack...I'm not sure how bad it is, I'll try to get a pic.

Lets not even talk about the flaking -_-

 

[*IrunnIt*]

Is it the one with extra plate or no plate?

 

[Who Dat Popcorn]

Not too sure. The kit is less than 2 years old though.

 

[*IrunnIt*]

Take pictures, don't drive the truck, contact djm about replacements.

 

[Who Dat Popcorn]

Here is a couple of pics. What do you guys think? Should I be worried?

 

[*IrunnIt*]

This is what the extra platw looks like. I would get replacements now b4 you end up like op

 

[Who Dat Popcorn]

I sent them an email along with some pics. I'll let you know what they say. Not too hopeful though.

 

[*IrunnIt*]

What do u mean not too hopeful? They better replace that shit. Who did u buy the kit from Tony? Cuz Ive had mine for around 3 years and mine came with the extra reinforcement.

 

[Who Dat Popcorn]

Nope, I bought it from a third party vendor :/

 

[Who Dat Popcorn]

Update to my situation

I provided them with some receipts, and they are covering BOTH arms (even though passenger side is still okay) at no charge to me! I am very satisfied with them!

 

[*IrunnIt*]

Good to hear

 

[DJM DIRECT]

djm will take care of you just 3rd party vendors drop it on the customers AND 3RD PARTY VENDORS are still selling the old design of the arms.

All the arms ive sold have been the new design and if you have any issues you can call me 24/7. I offer the cheapest prices on the net/back up my sales with 24/7 support and am a supporting vendor of this website you guys dont need to go anywhere else to buy any djm product

 

[Phil Dammit]

Update to my situation

I provided them with some receipts, and they are covering BOTH arms (even though passenger side is still okay) at no charge to me! I am very satisfied with them!

Nice set I gor used had reinforcement but that reinforcement is poorly thought out. Have to grind welds to ensure balljoints seat properly.

 

[DJM DIRECT]

heads up places are still selling the old a arm design. I just had to replace a set for a guy that bought the parts online new not to long ago. I only sell the new versions

 

[blastap]

My arms are from late 06, they are not flaking or cracking.

 

[xrbeach13]

well after all this reading i just opened my djm box yesterday and noticed that the uppers are flaking in 2 spots so iv decided to go to a powder coating place that *irunnit* recommended to me and for 200 bucks they will pc them red to match the bushings. as for the block and c notch idc the c notch will get under coating and the blocks can stay the way they are

 

[Torspd]

My arms are from late 06, they are not flaking or cracking.

Yeah, but yours is pampered more than most's.

 

[Phil Dammit]

When I got my uppers and lowers I was pullin coating off with my finger nail.

 

[Upnover]

well after all this reading i just opened my djm box yesterday and noticed that the uppers are flaking in 2 spots so iv decided to go to a powder coating place that *irunnit* recommended to me and for 200 bucks they will pc them red to match the bushings. as for the block and c notch idc the c notch will get under coating and the blocks can stay the way they are

So 749.00 for the kit now and another 200.00 to insure quality coating. :thumbdown:

 

[babyboi2284]

So 749.00 for the kit now and another 200.00 to insure quality coating. :thumbdown:

The kit is $595